Results 11 to 20 of 41
-
08-12-2020 03:37 AM #11
- Join Date
- Feb 2019
- Reputation
- 10
- Posts
- 35
9980XE + R6E Omega, BIOS 3006 memory performance was significantly degraded, and it was initially assumed that subsequent BIOS versions would fix the problem, but BIOS 3105 memory performance was still significantly degraded, with the same results as BIOS 3006
-
08-12-2020 03:45 AM #12
- Join Date
- Feb 2019
- Reputation
- 10
- Posts
- 35
Hi @Super Gnome
9980XE + R6E Omega, BIOS 3006 memory performance was significantly degraded, and it was initially assumed that subsequent BIOS versions would fix the problem, but BIOS 3105 memory performance was still significantly degraded, with the same results as BIOS 3006, I wonder if your 9980XE+X299 motherboard +BIOS 3006 or BIOS 3015 is experiencing memory performance degradation?
-
08-12-2020 08:46 AM #13
- Join Date
- Jul 2011
- Reputation
- 16
- Posts
- 37
So maybe it's something else that has changed in 3105 BIOS that caused my issues, RC code or I do not know what.
After recovering/downgrading my board succesfully with bios 3006, since I knew how to do it quickly then, I again upgraded from 3006 to 3105 (by pure curiosity) and same issue (with POST stuck ad 'BD' Q-code / 'Memory Detect' message) returned immediately. It went away only after second downgrade to 3006.
I have not experienced similar issues since initial BIOS release that I was using on day one with this mobo (it was 0806 I guess).Last edited by klosz007; 08-12-2020 at 10:45 AM.
-
08-12-2020 09:43 PM #14
Omega here with 10980xe (previous 7980xe) and bios 3105, after bios 3006, no problems at all, manually overclocked memory.
Some mates here should not say it is bios fault, but his fault mixing xmp with manual parameters=big mistake and call for issues.
Omega, 10980xe, G.Skill 3600, 2080Ti, SM951 256, 970 PRO, 860 EVO
Intel 750, WD SN750 Black, 840 Pro, 2xSkyhawk 4TB, 7200.14, 207EBK
EVGA T2 1600, Silverstone TJ11, Custom LC. @Acer Predator x34
-
08-12-2020 10:17 PM #15
Super Gnome PC Specs Motherboard ROG Rampage VI Extreme Omega / ROG Crosshair VIII Formula Processor Intel® Core™ i9-9980XE / AMD 3950x Memory (part number) Corsair LPX Vengeance DDR4 2666MHz 128 GB / Corsair Vengeance LPX 32GB DDR4-3200 32GB DDR4 3200MH Graphics Card #1 Asus 2080 Turbo / Asus 2080 ti Turbo Graphics Card #2 Asus 2080 Turbo / Asus 2080 ti Turbo Monitor JAPANNEXT JN-VT500UHD 4K 50-inch LCD Storage #1 Crucial MX500 1 TB / Sabient SB-ROCKET-NVMe4-500 Storage #2 Samsung 970 Pro 1 TB / ADATA XPG SX5500 Pro 3D NAND NVMe Gen3x4 PCIe M.2 CPU Cooler ROG Ryujin 360 / NZXT Kraken X62 Case Thermaltake View 71 TG / Thermaltake View 31 Power Supply CORSAIR AXi Series, AX1600i 1600 watt / Thermaltake Toughpower iRGB 1200 watt Accessory #1 Noctua 140mm 3000 RPM x 4 / Noctua 140 mm 3000 RPM x 2 Accessory #2 Gigabyte GC-A 2WAY NVLINK RGB (3-slot) / ROG NVLINK Bridge 3-Slot A
- Join Date
- Mar 2019
- Reputation
- 28
- Posts
- 400
Hey Corna. I am using an AMD system currently because my Rampage VI Omega Extreme system was crashing tons, needed Windows reinstalls a few times, and the list goes on (and I blame Asus software for all of it). My 9980xe was overclocked at default settings permanently with the prior BIOS, 3006, and at least a few of us had this problem. In my case, I have limited knowledge about tweaking the BIOS (and unfortunately have a Ryujin in the system--which also has horrible issues--basically that it responds to false, bogus temperatures that are not the CPU at all but rather to much cooler [false] temperatures from a probe that is nowhere near the CPU cores). I'm also afraid of doing something wrong and degrading my CPU silicon even more than Asus's faulty, horrible software already has. We all reverted to 0802 because of this BIOS issue, and then didn't have the problem.
As for having memory issues, how would one know if they are having such issues? Also, I may be of limited help to you until confirming this new BIOS is problem free, as I am just going to use a different system until then.Last edited by Super Gnome; 08-12-2020 at 10:34 PM.
-
08-12-2020 10:52 PM #16
This forum, along with overclock.net one is quite helpful, when the one that needs help listens (reads) and applies what is advised.
Talking about Corna, he was not long ago saying he had memory performance degradation, then I asked him about his components and configuration, and he said he was mixing XMP and manual parameters=call for issues, but he didn't listen, and still around saying problems come from bios releases... Quite funny!!!Omega, 10980xe, G.Skill 3600, 2080Ti, SM951 256, 970 PRO, 860 EVO
Intel 750, WD SN750 Black, 840 Pro, 2xSkyhawk 4TB, 7200.14, 207EBK
EVGA T2 1600, Silverstone TJ11, Custom LC. @Acer Predator x34
-
08-13-2020 02:50 AM #17
- Join Date
- Feb 2019
- Reputation
- 10
- Posts
- 35
-
08-13-2020 08:38 AM #18
If that mate mixes XMP and manual parameters won't be worth, really.
I repeat, in these forums some guys know basical configuration to let the rigs work properly, also which hardware can suit best your needings, for example in case of overclocking (a certain memory kit).Omega, 10980xe, G.Skill 3600, 2080Ti, SM951 256, 970 PRO, 860 EVO
Intel 750, WD SN750 Black, 840 Pro, 2xSkyhawk 4TB, 7200.14, 207EBK
EVGA T2 1600, Silverstone TJ11, Custom LC. @Acer Predator x34
-
08-18-2020 01:47 PM #19
Super Gnome PC Specs Motherboard ROG Rampage VI Extreme Omega / ROG Crosshair VIII Formula Processor Intel® Core™ i9-9980XE / AMD 3950x Memory (part number) Corsair LPX Vengeance DDR4 2666MHz 128 GB / Corsair Vengeance LPX 32GB DDR4-3200 32GB DDR4 3200MH Graphics Card #1 Asus 2080 Turbo / Asus 2080 ti Turbo Graphics Card #2 Asus 2080 Turbo / Asus 2080 ti Turbo Monitor JAPANNEXT JN-VT500UHD 4K 50-inch LCD Storage #1 Crucial MX500 1 TB / Sabient SB-ROCKET-NVMe4-500 Storage #2 Samsung 970 Pro 1 TB / ADATA XPG SX5500 Pro 3D NAND NVMe Gen3x4 PCIe M.2 CPU Cooler ROG Ryujin 360 / NZXT Kraken X62 Case Thermaltake View 71 TG / Thermaltake View 31 Power Supply CORSAIR AXi Series, AX1600i 1600 watt / Thermaltake Toughpower iRGB 1200 watt Accessory #1 Noctua 140mm 3000 RPM x 4 / Noctua 140 mm 3000 RPM x 2 Accessory #2 Gigabyte GC-A 2WAY NVLINK RGB (3-slot) / ROG NVLINK Bridge 3-Slot A
- Join Date
- Mar 2019
- Reputation
- 28
- Posts
- 400
-
08-21-2020 03:14 PM #20
- Join Date
- Apr 2015
- Reputation
- 10
- Posts
- 3
3105 has broke Wake On Lan on my Rampage VI Extreme. Is anyone else having that experience?
WoL still works on my RVIE Encore box though (I updated both boxes to their latest BIOS versions yesterday).