Armoury crate v3.1.5.0 / v3.1.6.0 [report here if any issues]

[rz_stalker]

Armoury Crate Does not allow me access to the motherboard?

Include the following info:
1. PC
2. Aura Sync products - ROG MAXIMUS XI CODE
3.
4. Wired
5. Reinstalled Windows? NO
6. Windows version & build Windows 10 Pro 64-bit BUILD 19041.508
7. Previous version of firmware or software that worked as expected AS ABOVE
8. Clear description of your issue - AFTER UPDATING ARMOURY CRATE IT WENT INTO A DOWNLOAD LOOP AND WOULD NOT INSTALL. THEN IT NOW DOES NOT DETECT THE MOTHERBOARD TO ALLOW ME TO ALTER THE RGB LIGHTS. IT SAYS NO DEVICES AVAILABLE.



9. Any screenshots of the issue
10. Use our new log collection function: Settings=>About=>App diagnostics

me too , i can't access to the watercooling ryuo 240 ,waiting for update :/

[FelixCat]

Any update on the bugs? Do you need help on coding? I can be of help if you need one.

[rz_stalker]

Any update on the bugs? Do you need help on coding? I can be of help if you need one.

Same probleme i can't open setting

[alibazlamit]

Anyone knows how to fix the stupid stuck update issue described here? I can't believe that its just being overlooked by ASUS

https://rog.asus.com/forum/showthrea...in-update-loop

[FelixCat]

same problem here no luck, asus is not even responding in this thread, I cannot play properly without able to control my fan curve (every time i need to change the fan curve in armoury crate to apply my custom fan curve profile -_-)

[Jesseinsf]

Update (Solved): Like I said numerous times before, turning on the Armoury Crate Download option in the BIOS fix the issue. Now I don't like it downloading on Windows' first start-up, so I turn it off and after I install Armoury Crate from the support page, I then turn on the Download option in the BIOS.

Include the following info:
1. PC / Laptop: PC
2. Aura Sync products: Motherboard
3. 3rd-party peripheral, audio, or lighting software: iCue and Razer Synapse 3.0
4. Wired / wireless connection: Wireless
5. Reinstalled Windows? Yes (many times)
6. Windows version & build: Windows 10 Pro for Workstations version 19042.546
7. Previous version of firmware or software that worked as expected: Any one prior to 3.1.6.0
8. Clear description of your issue:
I just installed a fresh copy of Windows 10 Por for Workstations and installed all the Drivers and Windows Updates. Then I downloaded Armoury Crate from my MB support page and installed it. I rebooted Windows and open Armoury Crate and updated anything that showed in the update section. Rebooted PC again and opened Armoury Crate and clicked on to the tools section and got this message: "You need install Armoury Crate service update before continuing".
9. Any screenshots of the issue:

-----------



------------

Item Version
---- -------
Armoury Crate UWP App 3.1.6.0
ROG Live Service 1.1.6.0
AURA Service (Lighting Service) 3.04.22
Armoury Crate lite service 3.1.5
ASUS AIOFan HAL 1.1.14
ASUS AURA Extension Card HAL 1.0.24
ASUS AURA Motherboard HAL 1.0.68.0
AacVGA 0.0.3.0
KingstonDram 1.0.27
AURA DRAM Component 1.0.53
ENE RGB HAL 1.1.26.1
ENE_QSI_Azeroth_HAL 1.0.9.0
Patriot Viper DRAM RGB 1.0.9.1

After Turning on the Armoury Crate download option in the BIOS and clicking yes to the Download notification in Windows:

It's the Same Which means that there was NO update. The motherboard Download option seems to complete the circuit.

Item Version
---- -------
Armoury Crate UWP App 3.1.6.0
ROG Live Service 1.1.6.0
AURA Service (Lighting Service) 3.04.22
Armoury Crate lite service 3.1.5
ASUS AIOFan HAL 1.1.14
ASUS AURA Extension Card HAL 1.0.24
ASUS AURA Motherboard HAL 1.0.68.0
AacVGA 0.0.3.0
KingstonDram 1.0.27
AURA DRAM Component 1.0.53
ENE RGB HAL 1.1.26.1
ENE_QSI_Azeroth_HAL 1.0.9.0
Patriot Viper DRAM RGB 1.0.9.1

[Mamang Beck]

Hi Admin, I cannot access to my ROG Gladius II. It is said that "We are sorry. There's an error with the device page. The application is going to reload the device page now".

1. Laptop --> G532Lv
2. Aura Sync products ---> Yes
3. 3rd-party peripheral, audio, or lighting software --> ROG Gladius II
4. Wired / wireless connection --> Wired
5. Reinstalled Windows? --> No
6. Windows version & build --> Windows 10 Home Single Language build 19041.508
7. Previous version of firmware or software that worked as expected --> it is working on previous version
8. Clear description of your issue --> I cannot access to my ROG Gladius II. It is said that "We are sorry. There's an error with the device page. The application is going to reload the device page now"
9. Any screenshots of the issue --> Attached

10. Use our new log collection function: Settings=>About=>App diagnostics --> Attached on onedrive
https://1drv.ms/u/s!AluoiDPBvLKvhycO...NY70P?e=EmQYqn

Please help and let me know what to be done.

[Terepin]

1. PC
2. ROG Strix Scope, ROG Gladius II Origin, ROG Strix B550-F
3. No.
4. Wired connection
5. Yes
6. Windows 10 v2004, build 19041.546
7. Not applicable
8. Newly released Serious Sam 4 supports Asus Aura, but lighting of my both Scope and Gladius II Origin freezes when exiting the game and doesn't return to original pattern, unless they are in Aura Sync mode. This can be fixed for Gladius by creating scenario profile for the game, but Scope's lighting still remains frozen until I manually change the lighting pattern.
9. Not applicable

[AJLWalton]

This is AJ From ZervTech Again. id like to happily confirm that the RGB DIMM SLOT RGB "3 of 4 SLOTS WORKING ISSUE" has been fixed. Now as far as the Stuttering is concerned, upon further diagnostics. I have found that with Armoury Crate, the DIMM slots RGB STUTTERS when on rainbow mode while "NZXT CAM" is running in the background. [i'd like to point out that if i use the "G-SKILL APP" along with NZXT CAM software, there is no stuttering, it is only when using ARMOURY CRATE to control DIMM Slots.

SECONDLY, THE OLED SCREEN DOES INDEED WORK and responds when in the Armoury Crate app, BUT upon cold boot [FAST STARTUP DISABLED] or restart, the oled screen does not retain the applied settings, it stay on CPU Temp with CHIP logo on top, i have to keep going into Armourty Crate and Manually Switch it back to either custom logo or cpu temp with Thermometer on top.

THRDLY, Upon further Diagnostics id also like to point out that I have a client who uses "WINSTEP NEXUS (DOCKS AND SHELVES APP)" and it would seem that upon "resetting Armoury Crate Windows App" the "NEXUS WINSTEP" app config seems to get corrupted on damages the dock settings and user is forced to restore from a backup config on the "WINSTEP NEXUS" app. it would seem that Armoury Crate tends to "USE/SHARE" certain system files that apps like "NEXUS WINSTEP" and others tend to affect each other in a negative way.

The sharing of these files between apps could be a large cause as to why many people's Armoury Crate Installs either tends to get corrupted to where Armory Crate just Stops functioning overall.

I Hope this helps in any way.

[cekeu]

Since I disabled Windows 10 fast start my Armory Crate software keeps my settings.
But you have to wait a few days before everything stabilizes.
Open Control Panel> System and Security> Power option> Choose what the power buttons do>
click on Modify the currently unavailable settings> then uncheck the activation of fast startup.
After a few days of use Armory Crate works normally.
It's my personal experience, maybe everyone has their own problems