Z390-E Gaming, SSD dont show Boot

[RichardBits]

Good Morning

My HDD got broken and today i got M.2 NVMe to replace my HDD.

My problem is: On Bios, Boot priority dont show any storage devices i have which are 1-SSD and 1-M.2 NVMe

My motherboard is Rog Strix Z390-E Gaming with latest drives 1602.

Note: M.2 NVMe is installed on socket ( M.2_2 ) i dont have any traces windows installed on this devices.

Any Help would be very appreciated. Thank you.

[cljustin@ROG]

Hello Richard,

Did you already format your M.2 via Windows in Disk Management?

[RichardBits]

Hi cljustin, i dont have Windows installed for that, what i have done so far is: I have reset CMOS ( because it covers alot of problems ) it didnt worked , them i changed the Sata controller to AHCI them to Intel RST ( for each reboot ) - Nothing worked , i have changed the cables of Sata ports of the devices of Storage, Am very curious what is causing this problem on Boot not founding any device of Storage ( M.2 and SSD ) , problem still persist.

My Pc is Half year new ( my Old HDD broken i got it from my old pc )

[Legolas]

Hi cljustin, i dont have Windows installed for that, what i have done so far is: I have reset CMOS ( because it covers alot of problems ) it didnt worked , them i changed the Sata controller to AHCI them to Intel RST ( for each reboot ) - Nothing worked , i have changed the cables of Sata ports of the devices of Storage, Am very curious what is causing this problem on Boot not founding any device of Storage ( M.2 and SSD ) , problem still persist.

My Pc is Half year new ( my Old HDD broken i got it from my old pc )

Hello RichardBits,

1. Unplug and plug the M.2 drive and test
2. If still persist, plug the M.2 on M.2_1 slot.
3. Go to BIOS -> CSM -> Disable;
4. Please Install OS on M.2 drive and it should show up in BIOS

[RichardBits]

Thank you