Results 1 to 3 of 3
  1. #1
    ROG Junior Member Array
    Join Date
    Oct 2020
    Reputation
    10
    Posts
    1

    Possible Issues with GT-AX11000 AI Protection and a few other things

    Hello all, I think I have a issue with the AI Protection, since last 2 firmware updates I have gotten no entries in the logs on all three options, I ask this as I used to get regular logged blocked attacks from mass scanners, sql injection attempts and some cve vulnerabilities entries ( I host a website etc..) but for the last 2 firmwares I havnt seen peep in the logs and I used to get hits daily with log entries. I have reset the router both ways including hard reset with new firmware and still no dice so I am wondering if anyone else has this issue and if it can be fixed (not that I dont mind not getting blocker logs but Id rather see if its actually working) as it seems to be a false negative to me.

    Also I cannot seem to run 160mhz on both 5g stations only one (not sure if it meant to be like that so some info regarding that will be awesome).
    Im also trying to setup a RP-AC68u unit as a bridge but dont seem to be getting the right speeds and it doesnt keep a consistent connection using the 5g channel, also looks like it uses the 2g channel as a anchor of sorts and only keeps a speed of 54mbps while 5gb gets around 1100mbps on average, any info on this too would be much appreciated.

    Thanks for any assistance.
    Last edited by FMCS-BOSS-ICEMAN; 10-18-2020 at 11:01 PM.

  2. #2
    ROG Member Array
    Join Date
    Nov 2018
    Reputation
    10
    Posts
    10

    same thing here i just bought this AX11000 and no entries in Aiprotection ever since i got the unit about 2 weeks already

  3. #3
    ROG Enthusiast Array
    Join Date
    Jul 2018
    Reputation
    11
    Posts
    64

    Quote Originally Posted by FMCS-BOSS-ICEMAN View Post
    Hello all, I think I have a issue with the AI Protection, since last 2 firmware updates I have gotten no entries in the logs on all three options, I ask this as I used to get regular logged blocked attacks from mass scanners, sql injection attempts and some cve vulnerabilities entries ( I host a website etc..) but for the last 2 firmwares I havnt seen peep in the logs and I used to get hits daily with log entries. I have reset the router both ways including hard reset with new firmware and still no dice so I am wondering if anyone else has this issue and if it can be fixed (not that I dont mind not getting blocker logs but Id rather see if its actually working) as it seems to be a false negative to me.

    Also I cannot seem to run 160mhz on both 5g stations only one (not sure if it meant to be like that so some info regarding that will be awesome).
    Im also trying to setup a RP-AC68u unit as a bridge but dont seem to be getting the right speeds and it doesnt keep a consistent connection using the 5g channel, also looks like it uses the 2g channel as a anchor of sorts and only keeps a speed of 54mbps while 5gb gets around 1100mbps on average, any info on this too would be much appreciated.

    Thanks for any assistance.
    Same here on the ai protection. I'm assuming it will get fixed in a future fw.
    As for the 5ghz bridge issue, if you want to use one of the 5ghz bands with the ac68u, you will have to give up on ax on that band. Give the ac68u a static ip when you first connect it to the ax11000. On the ax11000, whatever band you are going to use for the bridge (5ghz-1 or 5ghz-2), make sure the wireless mode is set to n/ac/ax mixed, turn off 802.11ax/wifi6, set the channel bandwidth to either 80 or 40 (40 would likely give you better range) and do not use auto on the control channel, manually pick a channel. Keep in mind that the ac68u will not connect to ax or 160mhz bandwidth. Good luck!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •