Results 1 to 3 of 3
  1. #1
    ROG Member Array
    Join Date
    May 2011
    Reputation
    10
    Posts
    19

    Booting from M.2 in new Crosshair VIII Hero

    Just installed a new Crosshair VIII Hero (WIFI). Have a M.2 where Windows 10 was installed. Can't get motherboard to boot from it.

    Suggestion please. Thanks!

  2. #2
    ROG Guru: Blue Belt Array RedSector73 PC Specs
    RedSector73 PC Specs
    Laptop (Model)FA506IU-AL130T x 2
    MotherboardROG CROSSHAIR VIII HERO (WI-FI)
    ProcessorAMD Ryzen 9 3900X 12-Core Processor
    Memory (part number)4 x G.SKILL F4-3800C14D-16GTZN 14-16-16-36 Samsung B-Die
    Graphics Card #1Gigabyte Aorus RTX 2080 Ti Xtreme WaterForce (GV-N208TAORUSX W-11GC)
    Sound CardArctis DAC
    MonitorAsus ROG Swift PG348Q
    Storage #1ADATA SX8200PNP 1TB
    Storage #22 x Samsung SSD 840 EVO 250GB
    CPU CoolerCoolermaster Liquid Pro Master 360
    CaseEVGA DG-87 Gunmetal Grey Gaming Case
    Power SupplyEVGA SuperNOVA G2 750W Gold Power
    Keyboard Corsair K95 RGB Platinum
    Mouse Corsair Gaming Sabre RGB Gaming Mouse
    Headset ARCTIS Pro Wireless
    Mouse Pad Cooler Master MP750 RGB Cloth Gaming Mouse Pad Extra Large
    OS Windows 10 64bit Pro
    Network RouterRT-AC87U

    Join Date
    Apr 2018
    Reputation
    40
    Posts
    752

    NVMe boot drive, goes in the top drive (one nearest the CPU)

    Here is the procedure for installation of Windows 10 on NVMe drive.

    1 - Make sure you unplug all SATA and USB drives, the M.2 drive has to be the only drive installed.
    2 - Go into the bios, under the boot tab there is an option for CSM, make sure it is disabled.
    3 - Click on secure boot option below and make sure it is set to other OS, Not windows UEFI.
    4 - Click on key management and clear secure boot keys.
    5 - Insert a USB memory stick with a UEFI bootable iso of Windows 10 on it.
    6 - Press F10 to save, exit and reboot.
    7 - Windows will now start installing to your NVMe drive as it has its own NVMe driver built in.
    8 - When the PC reboots hit F2 to go back into the BIOS, you will see under boot priority that Windows boot manager now lists your NVMe drive.
    9 - Click on secure boot again but now set it to Windows UEFI mode.
    10 - Click on key management and install default secure boot keys
    11 - Press F10 to save and exit and Windows will finish the installation.

    Once you have Windows up and running, shutdown the PC and reconnect your other SATA drives.

    Hope you find this helpful.

  3. #3
    ROG Member Array
    Join Date
    May 2011
    Reputation
    10
    Posts
    19

    Thanks RedSector73!

    Terrible experience with this board, boot crash or locks with almost all my GPUs. I found one old GPU that'll work.

    Wouldn't recommend this board to any one.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •