Results 1 to 2 of 2
  1. #1
    New ROGer Array
    Join Date
    Dec 2019
    Reputation
    10
    Posts
    1

    Z390-E Upgrade 4 RAM = No Boot

    Hello,

    i have Z390-E Gaming Mainboard and my 2 RAM works only on Dimm_A1 nad Dimm_A2.

    I know, recommended is B2 and A2 for Dual Channel...

    Now i buyed the same RAM and installed this but it doenst works...

    If i start Boot, the PC reboot 4x and then runs without Post or Bios (Nothing on Screen)

    I checked the all RAM on A1 and A2, all fine.

    Support says Upgrade Firmware and Reset Mainboard, i installed the newest Firmware and reset but same Problem...

    XMP Profile and Voltage from Auto to 1.35V same Problem

    Anybody a Idea?

    Mainboard = ASUS ROG Strix Z390-E Gaming
    RAM = G.Skill F4-3200C16D-16GTZR

  2. #2
    New ROGer Array
    Join Date
    Jul 2020
    Reputation
    17
    Posts
    15

    If it don't boot with two sticks in A2 & B2, you either have a bad mobo or bent CPU pins.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •