Z390-E Upgrade 4 RAM = No Boot

[Huibuh2010]

Hello,

i have Z390-E Gaming Mainboard and my 2 RAM works only on Dimm_A1 nad Dimm_A2.

I know, recommended is B2 and A2 for Dual Channel...

Now i buyed the same RAM and installed this but it doenst works...

If i start Boot, the PC reboot 4x and then runs without Post or Bios (Nothing on Screen)

I checked the all RAM on A1 and A2, all fine.

Support says Upgrade Firmware and Reset Mainboard, i installed the newest Firmware and reset but same Problem...

XMP Profile and Voltage from Auto to 1.35V same Problem

Anybody a Idea?

Mainboard = ASUS ROG Strix Z390-E Gaming
RAM = G.Skill F4-3200C16D-16GTZR

[Ezveedub]

If it don't boot with two sticks in A2 & B2, you either have a bad mobo or bent CPU pins.