Results 171 to 180 of 301
Thread: Rog strix b550-e gaming
-
06-17-2021 11:59 PM #171
- Join Date
- Jan 2021
- Reputation
- 10
- Posts
- 23
-
06-18-2021 06:33 AM #172
- Join Date
- Apr 2014
- Reputation
- 11
- Posts
- 55
RAM G.Skill PSU Corsair AX1200i
-
06-18-2021 06:51 PM #173
- Join Date
- Jan 2021
- Reputation
- 10
- Posts
- 11
-
06-19-2021 06:45 AM #174
- Join Date
- Apr 2014
- Reputation
- 11
- Posts
- 55
CPUs memory controler issue NO
-
06-19-2021 03:50 PM #175
- Join Date
- Oct 2018
- Reputation
- 11
- Posts
- 10
LMAO. Man you guys are genius XD
I also have been suffering from this damned cold boot problem. After I read your post, without keeping my expectations high, I tried to plug second 4 pin CPU power connector in to my mobo and to my suprise it fixed the problem(Just to be sure that it was not a fluke like in my previous posts, I performed 5 cold boots and pc booted without any issues)
But I am feeling kind of cheated because in the mobo manuel it says its optional to plug second connector in unless performing extreme overclocking and when I asked around online platforms people said 8 pin CPU connector is more than enough to power a stock 5900x, well it is certaily enough after PC is booted
TLDR: If you have enough cables and psu socket its better to connect second 4 pin CPU power connectorLast edited by Rainb0W; 06-19-2021 at 03:53 PM.
-
06-20-2021 06:21 AM #176
- Join Date
- Jun 2021
- Reputation
- 10
- Posts
- 7
FCLK 'Hole' can do 1933, 2000 but not even BOOT a 1900 :(
Hi guys, following my current config:
Ryzen 5900x
B550-E
2x32GB Micron-E
Had used multiple bios (Agesa 1.2.0.0, 1.2.0.1 A, 1.2.0.3 A Beta..) no fortune, it gets stuck at CODE 07..
If I change my FCLK to 1933 or 2000 it will boot just fine from the first attempt.
I want to use my ram @ 3800mhz 1:1, so i need FCLK 1900.
Anyone facing the same problem?
Thank you
-
06-20-2021 07:41 AM #177
- Join Date
- Apr 2014
- Reputation
- 11
- Posts
- 55
New
Version 2403
2021/06/19 20.52 MBytes
ROG STRIX B550-E GAMING BIOS 2403
"1. Update AMD AM4 AGESA V2 PI 1.2.0.3 Patch A
2. Improve system stability
Before running the USB BIOS Flashback tool, please rename the BIOS file (SB550EG.CAP) using BIOSRenamer."
-
06-20-2021 09:21 PM #178
- Join Date
- Jan 2021
- Reputation
- 10
- Posts
- 12
-
06-21-2021 01:34 AM #179
- Join Date
- Apr 2021
- Reputation
- 10
- Posts
- 17
If i active the option of ErP (S4+S5) to shutoff all USB and Lights, when i start the PC it cant boot. What i should do ?
CPU: RYZEN 5 5600X
VIDEO: ZOTAC RTX 3080 Trinity OC
MOTHER: ASUS ROG STRIX B550-E GAMING
RAM: F4-3200C16D-32GTZR
NVME/SSD M.2: WDS100T3XHC-00SJG0 / GP-AG4500G
CPU COOLER: NOCTUA NH-U12S-Chromax Black
FUENTE: NZXT C850
COOLERS: DEEPCOOL ARGB x6
MONITOR: TUF GAMING VG27A (2560px1440p)
-
06-21-2021 06:46 PM #180
- Join Date
- Jun 2021
- Reputation
- 10
- Posts
- 7
Version 2403 - For me worst than 2401 (beta) Mem oc became unstable
This new "stable" bios did not fixed my impossible to boot FCLK 1900 but ok on lower 1866 or higher 2000, but also made my RAM OC that was memtestx86 stable + memtest5 stable become unstable..