Armoury Crate was not detecting my ram so I decided I would try using the new uninstaller to uninstall everything then reinstall. The uninstaller seemed to run fine, I then restarted and ran the installer. After it finished installing none of my devices are detected now and there are two updates showing that will not install.
I noticed that in the UN-installer log it says the following for HalDLL.
[2020-10-29 19:56:34][HalDLL] HAL Count : 0
[2020-10-29 19:56:34][HalDLL] 3rd HAL Count : 7
[2020-10-29 19:57:18][HalDLL] Uninstall Hal related registry
[2020-10-29 19:57:18][HalDLL] Uninstall Hal end
[2020-10-29 19:57:18][HalDLL] HAL Count : 0
[2020-10-29 19:57:18][HalDLL] 3rd HAL Count : 4
I am wondering if the '3rd HAL Count 4' means that some components are were not fully uninstalled.
Here is the full uninstaller log. Does this seem right?
It also appears that after running the uninstaller I still have these folders under Program Files/ASUS. I am wondering if these are the '3rd HAL Count 4' that is mentioned in the uninstaller log since there are 4 Aac folders left.
1. Aac_AIOFan
2. Aac_ExtCard
3. AacMB
4. AacVGAHal
5. Armoury Crate Service Core
Once Armoury Crate opens I have the following problems:1) Armoury Crate does not detect any devices and when I click on my motherboard in Armoury Crate it says "This model is not currently supported".
2) The update center shows two updates
Update 1) ASUS HAL Central Version 20201015
Update 2) PRIME X570-PRO - HAL Version 1.1.14
Clicking update for just update for either seems to run (the progress bar moves) but after it "finishes" the updates the HTML and Device SDK go away and HAL still remains and the version for it changes from 1.1.14 to 1.0.68.
Restarting does not solve the problem and running the uninstaller again then re running the installer does not fix it.
Here are my computers specs:Motherboard: Asus Prime X570 Pro with latest BIOS version (2802)
Aura Sync products: Asus Prime X570 Pro, Asus String RTX 2080 Super, Coolermaster ML360R RGB, GSkill Trident Z RGB (2 sticks)
3rd-party peripheral, audio, or lighting software: Corsair ICUE is installed (with the Asus plugin disabled)
Windows Version 2004 (OS Build 19041.572)
Armoury Crate App Version 3.1.6.0
Here is the version info I can get from the Armoury Crate app under service version -> Check:
Item Version
---- -------
Armoury Crate UWP App 3.1.6.0
ROG Live Service 1.1.6.0
AURA Service (Lighting Service) 3.04.22
Armoury Crate lite service 3.1.5
AURA DRAM Component 1.0.54
ENE_DRAM_RGB_AURA42 1.00.02
ENE_QSI_Azeroth_HAL 1.0.9.0
GALAX GAMER RGB 1.00.02
PHISON HAL 1.0.6.0
Patriot Viper DRAM RGB 1.0.9.1
Patriot Viper M2 SSD RGB 1.0.6.3
To summarize what I think:It seems like the uninstaller is possibly not uninstalling all HAL components and/or the installer is not installing all the needed components
Any Idea on what I can do to fix this or should I just wait for the next update and try that? I am also wondering if it is worth trying a reinstall of Windows or would that somehow cause even more problems with it?
Thanks,
UPDATE:I was able to get my Motherboard, AIO, and Graphics card to appear again by running AacMBSetup.exe and AacVGASetup.exe (I had to copy of these files from the ROGSLiveTemp folder as they appeared during installation) and clicking uninstall from both and then running the old versions of those two installers from the legacy AuraSync Download on the ASUS site. It still shows an update for PRIME X570-PRO HAL that will not install, but the Motherboard, AIO, and Graphics Card lighting control works again. After this I did a complete-uninstall of it all then re-installed and it still show. But RAM still is not showing up.
Now the only update I see is PRIME X570-PRO HAL Version 1.1.14 (after clicking update the update button just re-appears
I am still unable to control my RAM and have noticed the following:
In Armoury Crate under Service Version -> Check, I have AURA DRAM Component 1.0.54 . Regardless of what I try I cannot seem to remove this components to try and install an older version like I did with the motherboard and graphics card. If I run AacSetup.exe (which says its for DRAM HAL) and click uninstall, the installer shows it as gone but it still appears in ArmouryCrate, the same goes for.
So I am led to believe that there is some trace of the DRAM component that is not being removed even when using the new Armoury Crate installer. If I can't figure out how to remove this, I will just try a reinstall of windows then downloading Armoury Crate again and see what happens. Any suggestions on how to completely remove the DRAM component so I can try reinstalling it or the older version?
After doing the above fix for my motherboard, AIO, and GPU here are the new Service Version Numbers:
Item Version
---- -------
Armoury Crate UWP App 3.2.4.0
ROG Live Service 1.1.9.0
AURA Service (Lighting Service) 3.04.22
Armoury Crate lite service 3.1.5
ASUS AURA Extension Card HAL 1.0.24
ASUS AURA Motherboard HAL 1.0.68.0
AacVGA 0.0.3.0
KingstonDram 1.0.28
AURA DRAM Component 1.0.54
PHISON HAL 1.0.6.0
Patriot Viper DRAM RGB 1.0.9.1
Patriot Viper M2 SSD RGB 1.0.6.3