Page 1 of 2 1 2 LastLast
Results 1 to 10 of 15
  1. #1
    ROG Guru: Yellow Belt Array Baio73 PC Specs
    Baio73 PC Specs
    MotherboardAsus ROG Crosshair VIII Formula BIOS 3402
    ProcessorAMD Ryzen 3900XT
    Memory (part number)2x8 Corsair 4000C19D
    Graphics Card #1Sapphire RX 5700XT
    MonitorLG 34GK950F
    Storage #1Samsung 980PRO 512Gb NVMe
    Storage #2WD Black SN850 2Tb NVMe
    CPU CoolerCorsair H150i Elite Capellix
    CaseLian Li 011D XL
    Power SupplyCorsair AX860i
    Keyboard Logitech G513
    Mouse Logitech G903 + Powerplay
    Headset G933 Artemis Spectrum
    Mouse Pad Corsair MM 700 RGB
    Headset/Speakers Logitech G560
    OS Windows 10 64bit
    Network RouterLynksys EA6500
    Accessory #1 Corsair Commander Pro
    Accessory #2 10xCorsair QL120 RGB fan

    Join Date
    Jul 2014
    Reputation
    11
    Posts
    160

    CrossHair VIII FOrmula: BIOS 2311 and 4 DIMM troubles

    I had problems with my RAM (4x8Gb B-Die) until BIOS 2206... with any previous version the system was stable but Kharu RAM test failed.

    Today I've given a chance to BIOS 2311, I struggled a bit but finally passed 4 hours of Kharu, I found stability setting in the BIOS the values of "Power Supply System" section from DRAM Calculator (which I didn't do with 2206).
    When I rebooted the system, here's the bad surprise... the system hangs on "Test CMOS". If I power off and the on, I get "F9" code, then the pc reboots 3 times and finally I get control back (but have to go into the BIOS and load Safe Defaults).
    Here are the values I entered from Power Supply System:

    CPU:
    LLC [Level 4]
    Current Capability [140%]
    VRM Switching Frequency [400]
    Power Duty Control [T.Probe]
    Power Phase Control [Power Phase Response]
    Power Thermal Control [120]
    Manual Adjustment [Ultra Fast]

    VDDSOC:
    LLC [Level 3]
    Current Capability [120%]
    Switching Frequency [Manual]
    Switching Frequency (Fixed) [400]
    Pashe Control [Manual/Optimized]

    DRAM:
    Current Capability [120%]
    Power Phase Control [Extreme]
    Switching Frequency [Manual]
    Switching Frequency (Fixed) [400]

    Other settings from Calculator:
    DRAM Voltage [1.44]
    SOC Voltage [1.1]
    VDDG CCD Voltage [1.050]
    VDDG IOD Voltage [1.050]
    CLDO VDDP Voltage [1.050]

    Any help will be VERY appreciated!!

    Baio
    Last edited by Baio73; 11-04-2020 at 03:56 PM.
    CASE Lian Li 011D XL CPU AMD Ryzen 5800X COOLER Corsair H150i Elite Capellix MOBO Asus ROG Crosshair VIII Formula RAM 2x8 Corsair 4000C19D PSU Corsair AX860i VGA Sapphire RX 5700 XT DISPLAY LG 34GK950GF AUDIO Logitech G560 SDD Samsung 970PRO NVVe 512Gb - WD Black SN850 2Tb NVMe NPUT Logitech G903 + Powerplay + Corsair MM700 RGB - G513

  2. #2
    ROG Guru: Yellow Belt Array Baio73 PC Specs
    Baio73 PC Specs
    MotherboardAsus ROG Crosshair VIII Formula BIOS 3402
    ProcessorAMD Ryzen 3900XT
    Memory (part number)2x8 Corsair 4000C19D
    Graphics Card #1Sapphire RX 5700XT
    MonitorLG 34GK950F
    Storage #1Samsung 980PRO 512Gb NVMe
    Storage #2WD Black SN850 2Tb NVMe
    CPU CoolerCorsair H150i Elite Capellix
    CaseLian Li 011D XL
    Power SupplyCorsair AX860i
    Keyboard Logitech G513
    Mouse Logitech G903 + Powerplay
    Headset G933 Artemis Spectrum
    Mouse Pad Corsair MM 700 RGB
    Headset/Speakers Logitech G560
    OS Windows 10 64bit
    Network RouterLynksys EA6500
    Accessory #1 Corsair Commander Pro
    Accessory #2 10xCorsair QL120 RGB fan

    Join Date
    Jul 2014
    Reputation
    11
    Posts
    160

    UPDATE:
    Quite the same behaviour with BIOS 2402 beta, on reboot I get error code 22 "detect HD", but if I reset via case button, the pc finally reboots.

    Baio
    CASE Lian Li 011D XL CPU AMD Ryzen 5800X COOLER Corsair H150i Elite Capellix MOBO Asus ROG Crosshair VIII Formula RAM 2x8 Corsair 4000C19D PSU Corsair AX860i VGA Sapphire RX 5700 XT DISPLAY LG 34GK950GF AUDIO Logitech G560 SDD Samsung 970PRO NVVe 512Gb - WD Black SN850 2Tb NVMe NPUT Logitech G903 + Powerplay + Corsair MM700 RGB - G513

  3. #3
    ROG Guru: Brown Belt Array RedSector73 PC Specs
    RedSector73 PC Specs
    Laptop (Model)FA506IU-AL130T x 2
    MotherboardROG CROSSHAIR VIII HERO (WI-FI)
    ProcessorAMD Ryzen 9 3900X 12-Core Processor
    Memory (part number)4 x G.SKILL F4-3800C14D-16GTZN 14-16-16-36 Samsung B-Die
    Graphics Card #1Gigabyte Aorus RTX 2080 Ti Xtreme WaterForce (GV-N208TAORUSX W-11GC)
    Sound CardArctis DAC
    MonitorAsus ROG Swift PG348Q
    Storage #1ADATA SX8200PNP 1TB
    Storage #22 x Samsung SSD 840 EVO 250GB
    CPU CoolerCoolermaster Liquid Pro Master 360
    CaseEVGA DG-87 Gunmetal Grey Gaming Case
    Power SupplyEVGA SuperNOVA G2 750W Gold Power
    Keyboard Corsair K95 RGB Platinum
    Mouse Corsair Gaming Sabre RGB Gaming Mouse
    Headset ARCTIS Pro Wireless
    Mouse Pad Cooler Master MP750 RGB Cloth Gaming Mouse Pad Extra Large
    OS Windows 10 64bit Pro
    Network RouterRT-AC87U

    Join Date
    Apr 2018
    Reputation
    42
    Posts
    1,201

    HI Baio

    Ryzen Dram calculator what RAM timings are you using from it and did you import them Thaiphoon ?

  4. #4
    ROG Guru: Yellow Belt Array Baio73 PC Specs
    Baio73 PC Specs
    MotherboardAsus ROG Crosshair VIII Formula BIOS 3402
    ProcessorAMD Ryzen 3900XT
    Memory (part number)2x8 Corsair 4000C19D
    Graphics Card #1Sapphire RX 5700XT
    MonitorLG 34GK950F
    Storage #1Samsung 980PRO 512Gb NVMe
    Storage #2WD Black SN850 2Tb NVMe
    CPU CoolerCorsair H150i Elite Capellix
    CaseLian Li 011D XL
    Power SupplyCorsair AX860i
    Keyboard Logitech G513
    Mouse Logitech G903 + Powerplay
    Headset G933 Artemis Spectrum
    Mouse Pad Corsair MM 700 RGB
    Headset/Speakers Logitech G560
    OS Windows 10 64bit
    Network RouterLynksys EA6500
    Accessory #1 Corsair Commander Pro
    Accessory #2 10xCorsair QL120 RGB fan

    Join Date
    Jul 2014
    Reputation
    11
    Posts
    160

    Quote Originally Posted by RedSector73 View Post
    HI Baio

    Ryzen Dram calculator what RAM timings are you using from it and did you import them Thaiphoon ?
    Hi, and thanks for your replay!
    Values are imported using Thaiphoon, they are the "safe" option:



    The only difference is DRAM Voltage, I need to set it to 1.44v to make them stable.

    But the very strange thing is that RAM are ok under stress test (tonight it passed 12+ hours), the problems come out rebooting! I can't believe it's a matter of RAM values.

    Baio
    CASE Lian Li 011D XL CPU AMD Ryzen 5800X COOLER Corsair H150i Elite Capellix MOBO Asus ROG Crosshair VIII Formula RAM 2x8 Corsair 4000C19D PSU Corsair AX860i VGA Sapphire RX 5700 XT DISPLAY LG 34GK950GF AUDIO Logitech G560 SDD Samsung 970PRO NVVe 512Gb - WD Black SN850 2Tb NVMe NPUT Logitech G903 + Powerplay + Corsair MM700 RGB - G513

  5. #5
    ROG Guru: Brown Belt Array RedSector73 PC Specs
    RedSector73 PC Specs
    Laptop (Model)FA506IU-AL130T x 2
    MotherboardROG CROSSHAIR VIII HERO (WI-FI)
    ProcessorAMD Ryzen 9 3900X 12-Core Processor
    Memory (part number)4 x G.SKILL F4-3800C14D-16GTZN 14-16-16-36 Samsung B-Die
    Graphics Card #1Gigabyte Aorus RTX 2080 Ti Xtreme WaterForce (GV-N208TAORUSX W-11GC)
    Sound CardArctis DAC
    MonitorAsus ROG Swift PG348Q
    Storage #1ADATA SX8200PNP 1TB
    Storage #22 x Samsung SSD 840 EVO 250GB
    CPU CoolerCoolermaster Liquid Pro Master 360
    CaseEVGA DG-87 Gunmetal Grey Gaming Case
    Power SupplyEVGA SuperNOVA G2 750W Gold Power
    Keyboard Corsair K95 RGB Platinum
    Mouse Corsair Gaming Sabre RGB Gaming Mouse
    Headset ARCTIS Pro Wireless
    Mouse Pad Cooler Master MP750 RGB Cloth Gaming Mouse Pad Extra Large
    OS Windows 10 64bit Pro
    Network RouterRT-AC87U

    Join Date
    Apr 2018
    Reputation
    42
    Posts
    1,201

    Hey, thanks for the information, makes it easier.

    Suggest trying 1.15 or 1.125 SOC voltage and see if you get down to 1.42 to 1.4v than thought about another possile direction...

    You can even just bump up to 1.5v for the RAM and leave SOC 1.1 (1.5v for the ram is safe) 1.5v is what my @3800 CL14 RAM runs by default anyway. This document might find useful https://www.samsung.com/semiconducto...1_Feb_17-0.pdf

    The issue (suggests to me anyway) is that the memory controller needs a bump and hopeful we can adjust the RAM down a little was my first thought but maybe the RAM needs little more to be happy (which is my current thinking at boot/cold rather than first of the memory controller).

    Hope that is to much of two different directions, just feel it could be either.

    other things...
    CAD Bus <Rec> or <ALT 2> may give better results and <ALT 1> for Termination block or even the other way try ProcODT 36.9.
    Last edited by RedSector73; 11-06-2020 at 08:01 AM.

  6. #6
    ROG Guru: Yellow Belt Array Baio73 PC Specs
    Baio73 PC Specs
    MotherboardAsus ROG Crosshair VIII Formula BIOS 3402
    ProcessorAMD Ryzen 3900XT
    Memory (part number)2x8 Corsair 4000C19D
    Graphics Card #1Sapphire RX 5700XT
    MonitorLG 34GK950F
    Storage #1Samsung 980PRO 512Gb NVMe
    Storage #2WD Black SN850 2Tb NVMe
    CPU CoolerCorsair H150i Elite Capellix
    CaseLian Li 011D XL
    Power SupplyCorsair AX860i
    Keyboard Logitech G513
    Mouse Logitech G903 + Powerplay
    Headset G933 Artemis Spectrum
    Mouse Pad Corsair MM 700 RGB
    Headset/Speakers Logitech G560
    OS Windows 10 64bit
    Network RouterLynksys EA6500
    Accessory #1 Corsair Commander Pro
    Accessory #2 10xCorsair QL120 RGB fan

    Join Date
    Jul 2014
    Reputation
    11
    Posts
    160

    So, I tried every combination raising VSOC up to 1.125 and lowering DRAM Voltage from 1.4 to 1.2... no luck.
    Got every time a different error in mobo's display (15, 23, TEST CMOS, detect HDD), with 1.125+1.44 I got BSOD while loading Windows (everytime it was something IRQ or HDD related). Finally I needed to load fail safe defaults to get Windows restored.

    I have not understood what you suggested about CAD BUS values... do I have to try the valus you suggested along with the Voltage (SOC and DRAM) ones or are they independent?

    Thanks again!

    Baio
    CASE Lian Li 011D XL CPU AMD Ryzen 5800X COOLER Corsair H150i Elite Capellix MOBO Asus ROG Crosshair VIII Formula RAM 2x8 Corsair 4000C19D PSU Corsair AX860i VGA Sapphire RX 5700 XT DISPLAY LG 34GK950GF AUDIO Logitech G560 SDD Samsung 970PRO NVVe 512Gb - WD Black SN850 2Tb NVMe NPUT Logitech G903 + Powerplay + Corsair MM700 RGB - G513

  7. #7
    ROG Guru: Yellow Belt Array Baio73 PC Specs
    Baio73 PC Specs
    MotherboardAsus ROG Crosshair VIII Formula BIOS 3402
    ProcessorAMD Ryzen 3900XT
    Memory (part number)2x8 Corsair 4000C19D
    Graphics Card #1Sapphire RX 5700XT
    MonitorLG 34GK950F
    Storage #1Samsung 980PRO 512Gb NVMe
    Storage #2WD Black SN850 2Tb NVMe
    CPU CoolerCorsair H150i Elite Capellix
    CaseLian Li 011D XL
    Power SupplyCorsair AX860i
    Keyboard Logitech G513
    Mouse Logitech G903 + Powerplay
    Headset G933 Artemis Spectrum
    Mouse Pad Corsair MM 700 RGB
    Headset/Speakers Logitech G560
    OS Windows 10 64bit
    Network RouterLynksys EA6500
    Accessory #1 Corsair Commander Pro
    Accessory #2 10xCorsair QL120 RGB fan

    Join Date
    Jul 2014
    Reputation
    11
    Posts
    160

    UPDATE:

    Tried also CAD Bus and Termination Block values you suggested but still no luck... when the pc reboots I gets stuck on DETECT HDD error in mobo display.

    Baio
    CASE Lian Li 011D XL CPU AMD Ryzen 5800X COOLER Corsair H150i Elite Capellix MOBO Asus ROG Crosshair VIII Formula RAM 2x8 Corsair 4000C19D PSU Corsair AX860i VGA Sapphire RX 5700 XT DISPLAY LG 34GK950GF AUDIO Logitech G560 SDD Samsung 970PRO NVVe 512Gb - WD Black SN850 2Tb NVMe NPUT Logitech G903 + Powerplay + Corsair MM700 RGB - G513

  8. #8
    ROG Guru: Brown Belt Array RedSector73 PC Specs
    RedSector73 PC Specs
    Laptop (Model)FA506IU-AL130T x 2
    MotherboardROG CROSSHAIR VIII HERO (WI-FI)
    ProcessorAMD Ryzen 9 3900X 12-Core Processor
    Memory (part number)4 x G.SKILL F4-3800C14D-16GTZN 14-16-16-36 Samsung B-Die
    Graphics Card #1Gigabyte Aorus RTX 2080 Ti Xtreme WaterForce (GV-N208TAORUSX W-11GC)
    Sound CardArctis DAC
    MonitorAsus ROG Swift PG348Q
    Storage #1ADATA SX8200PNP 1TB
    Storage #22 x Samsung SSD 840 EVO 250GB
    CPU CoolerCoolermaster Liquid Pro Master 360
    CaseEVGA DG-87 Gunmetal Grey Gaming Case
    Power SupplyEVGA SuperNOVA G2 750W Gold Power
    Keyboard Corsair K95 RGB Platinum
    Mouse Corsair Gaming Sabre RGB Gaming Mouse
    Headset ARCTIS Pro Wireless
    Mouse Pad Cooler Master MP750 RGB Cloth Gaming Mouse Pad Extra Large
    OS Windows 10 64bit Pro
    Network RouterRT-AC87U

    Join Date
    Apr 2018
    Reputation
    42
    Posts
    1,201

    Qcode 22 is memory code I thought something like 'OEM pre-memory initialisation'

    Maybe try relaxed timings, like this and see if we get start point to tigthen up from
    Click image for larger version. 

Name:	tempAAA.jpg 
Views:	1 
Size:	605.5 KB 
ID:	86743
    Last edited by RedSector73; 11-06-2020 at 11:38 PM.

  9. #9
    ROG Guru: Yellow Belt Array Baio73 PC Specs
    Baio73 PC Specs
    MotherboardAsus ROG Crosshair VIII Formula BIOS 3402
    ProcessorAMD Ryzen 3900XT
    Memory (part number)2x8 Corsair 4000C19D
    Graphics Card #1Sapphire RX 5700XT
    MonitorLG 34GK950F
    Storage #1Samsung 980PRO 512Gb NVMe
    Storage #2WD Black SN850 2Tb NVMe
    CPU CoolerCorsair H150i Elite Capellix
    CaseLian Li 011D XL
    Power SupplyCorsair AX860i
    Keyboard Logitech G513
    Mouse Logitech G903 + Powerplay
    Headset G933 Artemis Spectrum
    Mouse Pad Corsair MM 700 RGB
    Headset/Speakers Logitech G560
    OS Windows 10 64bit
    Network RouterLynksys EA6500
    Accessory #1 Corsair Commander Pro
    Accessory #2 10xCorsair QL120 RGB fan

    Join Date
    Jul 2014
    Reputation
    11
    Posts
    160

    Some news...
    Tonight I left the pc running all night long with PassMark MemTest (100% passed without errors) with timings as in my first post (except proODT 43.6 and CAD_BUS Block set to ALT2).
    I also disabled SATA in the BIOS, as I have only Nvme drives.
    Magically no reboot issue (tried several times)... when I last boot to come here and write about my glory, I got 3 consecutive BSODs while Windows was loading.

    So I decided to try your relaxed timings (proODT and CAD_BUS set as above, all voltages as you wrote) but on reboot I got the pc stuck on "TEST CMOS" (one time it was "LOAD VGA BIOS"). Windows loading was always ok, no BSOD.

    The more I try, the more I'm getting perplexed over and over... I can't see a logic in this behaviour.

    Baio

    EDIT:
    Forgot to say that CPU/VDDSOC/DRAM section are always set as in the first post (according to Calculator's Power Supply System section).

    EDIT 2:
    Kharu RAM Test failed in 42m with 1.36 VDRAM, gonna try to raise it one step.

    EDIT 3:
    Found stability @1.37, reboot problem still there.
    Waiting for new orders :-)*
    Last edited by Baio73; 11-07-2020 at 06:40 PM.
    CASE Lian Li 011D XL CPU AMD Ryzen 5800X COOLER Corsair H150i Elite Capellix MOBO Asus ROG Crosshair VIII Formula RAM 2x8 Corsair 4000C19D PSU Corsair AX860i VGA Sapphire RX 5700 XT DISPLAY LG 34GK950GF AUDIO Logitech G560 SDD Samsung 970PRO NVVe 512Gb - WD Black SN850 2Tb NVMe NPUT Logitech G903 + Powerplay + Corsair MM700 RGB - G513

  10. #10
    ROG Member Array WhoSaidThat PC Specs
    WhoSaidThat PC Specs
    MotherboardAsus Crosshair VIII Hero (Wifi) w/BIOS 3003
    Processor3900X
    Memory (part number)4 x 8GB PVS416G440C9K (non-QVL) @3600
    Graphics Card #1Asus STRIX 2080Ti Gaming OC
    Sound CardAsus Xonar Phoebus
    MonitorAcer x27
    Storage #1Adata XPG SX8200 Pro
    Storage #22 x Adata XPG SX8200 Pro
    CPU CoolerNoctua D15S
    CaseSilverstone FT02
    Power SupplyCorsair AX1600i
    Keyboard Razer Huntsman Tournament
    Mouse Logitech MX Master 2S
    Headset/Speakers 2 x PSB Alpha PS1
    OS Windows 10

    Join Date
    Jan 2016
    Reputation
    10
    Posts
    18

    With my 4 x B-Die and these newer BIOSes I was only stable at 2133 so I ditched 2 and am stable at 3200 14-14-14-14-28 now. The first step was still finding settings that were stable at 2133. I went from there. Have you found any stable settings with the new BIOS?

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •