NEW Marvell AQuantia AQC107 PHY FIRMWARE 4.2.32 Release

[Desertum_0]

send me your discord and you disappear ?
i was trying to help you bruh so now i dont think that i will since you ignored my message
How do you want me to help you without controlling or showing something ?
it's something easier


If you feel that your not comfortable to add random people via social media things or something like that ... then just follow what i did // i follow the instruction link in page [2] that's all.

There is no secret with me.



link : https://www.rashedtalukder.com/updat...e-and-drivers/
Cya.

I have not disappear mate, I just dont use discord but I should have known better to ask you instead of following the DIAG -K method which has rendered my Marwell NIC useless.

I tried following your method but it never worked for me.

[lLegendaary]

Well , I would like to help you but can't do anything behind screen u need someone to check

[Desertum_0]

Well , I would like to help you but can't do anything behind screen u need someone to check

What are you on?
I sent you a PM.

You are joke legend, first you offer your so called help and then you get salty because I "vanish".

Thanks but no thanks.

[Desertum_0]

Managed to fix it



restsugavan method using DIAG -K does work HOWEVER it was neglected by restsugavan that once you start using DIAG -K IT WILL INSTALL A DRIVER THAT WILL MAKE THE AQUANTIA MARVELL VANISHED even after flashing the new firmware.
Once you finish flashing the new firmware, you need to go to device manager and find the AquantiaDiag Device under Samples and REMOVE IT otherwise your NIC will not show up.

[restsugavan]

Managed to fix it



restsugavan method using DIAG -K does work HOWEVER it was neglected by restsugavan that once you start using DIAG -K IT WILL INSTALL A DRIVER THAT WILL MAKE THE AQUANTIA MARVELL VANISHED even after flashing the new firmware.
Once you finish flashing the new firmware, you need to go to device manager and find the AquantiaDiag Device under Samples and REMOVE IT otherwise your NIC will not show up.

Only install new driver after finishing flash. Your AQC107 will running smoothly.

[Desertum_0]

Only install new driver after finishing flash. Your AQC107 will running smoothly.

Please, do not mislead us.
I have shown pictures that show that you need to remove the Aquantia Diag Service for the NIC to work again,

[toretobcnn]

I have internet cuts with the marvell for no apparent reason, I am desperate! some help?

I have using the driver 2.2.1.0 and the firmware 4.2.29! some help? it is on an asus formula XII

[murenitu]

I read the entire post and I feel like I'm an idiot, it still doesn't clarify ... please can you give me a little help step by step! as simple as possible?

I need to do something since not even formula XII cuts the internet when it wants to.