NEW Marvell AQuantia AQC107 PHY FIRMWARE 4.2.32 Release

[Deepbluee]

I figured out how to update firmware by following this guide:

https://www.rashedtalukder.com/updat...e-and-drivers/

it may help you guys aswell.

[lLegendaary]

i will update you asap

[lLegendaary]

I figured out how to update firmware by following this guide:

https://www.rashedtalukder.com/updat...e-and-drivers/

it may help you guys aswell.

Worked fine
and thank you @DeepBlueee.





and for everyone who post new update without sharing the method ... i can't say anything .. once you need people they disappeared and gone lmfao

[Desertum_0]

I am glad that it worked for you but in my case I have no idea why it does not.
I download the Marvell AQtion Firmware Updater Utility and followed the Notepad prompts to change this : <pciid vid="1d6a" did="07b1" sdid="8757" svid="1043" />

Weird thing is that where shows the currenty firmware, I am sure I am using 4.2.29/


Any help?

Thank you all.

[Desertum_0]

Reading the readme file from here : https://www.station-drivers.com/inde...665&lang=fr-ca (Download the zip file and open the mentioned file).

It seems that this firmware only supports an specific Hardware ID : only support PCI\VEN_1D6A&DEV_07B1&SUBSYS_104617AA
Mine shows as :
PCI\VEN_1D6A&DEV_07B1&SUBSYS_87571043&REV_02
PCI\VEN_1D6A&DEV_07B1&SUBSYS_87571043
PCI\VEN_1D6A&DEV_07B1&CC_020000
PCI\VEN_1D6A&DEV_07B1&CC_0200

It also seems that is REV 2 for this Marwell 10G Ethernet.
Check your hardware ID revision in case if the firmware fails.

[Desertum_0]

Worked fine
and thank you @DeepBlueee.





and for everyone who post new update without sharing the method ... i can't say anything .. once you need people they disappeared and gone lmfao

Hi Legend man.

I am glad that it worked for you.
How did you manage to update your firmware?

using this method : https://www.rashedtalukder.com/updat...e-and-drivers/ yield no result for me.
I am not sure if this firmware is not compatible with my NIC or maybe I have misssed something.

and for everyone who post new update without sharing the method I am with you in this regard.

Thanks for your help in advanced.

[lLegendaary]

Hi Legend man.

I am glad that it worked for you.
How did you manage to update your firmware?

using this method : https://www.rashedtalukder.com/updat...e-and-drivers/ yield no result for me.
I am not sure if this firmware is not compatible with my NIC or maybe I have misssed something.

and for everyone who post new update without sharing the method I am with you in this regard.

Thanks for your help in advanced.

ok , share your discord to me i'll add you asap to help you.

[restsugavan]

AQUANTIA AQC107 Firmware 4.2.32 Update Guide via DIAG method

Aquantia AQC107 was popular 10G Ethernet NIC devices so there are many tools provide from different OEM for update its firmware.
Due different revision of the chip , different tools may or may not update these NICs chip firmware completely.
There are the original tools call " DIAG " with coming with this link below .

http://www.station-drivers.com/index...306&lang=fr-ca

Step 1 Download above link then exacting it on your download folder.



Step 2 You'll see Aquantia Folder enter it



Step 3 You'll see AMD64 Folder enter it



Step 4 Select All files then place it on C:\AQC107 folder (eg.)



Step 5 Open Admin Command Prompt Windows enter C:\AQC107 directory then use DIAG -K command as above picture.



Step 6 Choose 3 menu there will be 4 submenu below use 2 Update flash image with your new AQC107.clx firmware file.

Waiting to finish the light of AQC107 port will shutdown don't be worry. Everything done.
exit Windows Admin command then re-install AQC107 driver once.
with Marvell/Aquantia AQtion Network Adapter Drivers Version 2.2.1.0 WHQL

http://www.station-drivers.com/index...553&lang=fr-ca

Your NICs will update as first picture and run smoothly.
Any question please left your comment below.
Have a nice days all. Sorry to late reply everyone due testing Icelake SP system with Intel teams.

[Desertum_0]

Be aware that I followed the exact prompts as per above.
I choose the AQC107.CLX firmware from station driver (initial post) and now I believe I bricked my Marwell NIC.

As you can see, it does not show at all on Windows.

[lLegendaary]

send me your discord and you disappear ?
i was trying to help you bruh so now i dont think that i will since you ignored my message
How do you want me to help you without controlling or showing something ?
it's something easier


If you feel that your not comfortable to add random people via social media things or something like that ... then just follow what i did // i follow the instruction link in page [2] that's all.

There is no secret with me.



link : https://www.rashedtalukder.com/updat...e-and-drivers/
Cya.