NEW Marvell AQuantia AQC107 PHY FIRMWARE 4.2.32 Release

[Desertum_0]

send me your discord and you disappear ?
i was trying to help you bruh so now i dont think that i will since you ignored my message
How do you want me to help you without controlling or showing something ?
it's something easier


If you feel that your not comfortable to add random people via social media things or something like that ... then just follow what i did // i follow the instruction link in page [2] that's all.

There is no secret with me.



link : https://www.rashedtalukder.com/updat...e-and-drivers/
Cya.

I have not disappear mate, I just dont use discord but I should have known better to ask you instead of following the DIAG -K method which has rendered my Marwell NIC useless.

I tried following your method but it never worked for me.

[lLegendaary]

Well , I would like to help you but can't do anything behind screen u need someone to check

[Desertum_0]

Well , I would like to help you but can't do anything behind screen u need someone to check

What are you on?
I sent you a PM.

You are joke legend, first you offer your so called help and then you get salty because I "vanish".

Thanks but no thanks.

[Desertum_0]

Managed to fix it



restsugavan method using DIAG -K does work HOWEVER it was neglected by restsugavan that once you start using DIAG -K IT WILL INSTALL A DRIVER THAT WILL MAKE THE AQUANTIA MARVELL VANISHED even after flashing the new firmware.
Once you finish flashing the new firmware, you need to go to device manager and find the AquantiaDiag Device under Samples and REMOVE IT otherwise your NIC will not show up.

[restsugavan]

Managed to fix it



restsugavan method using DIAG -K does work HOWEVER it was neglected by restsugavan that once you start using DIAG -K IT WILL INSTALL A DRIVER THAT WILL MAKE THE AQUANTIA MARVELL VANISHED even after flashing the new firmware.
Once you finish flashing the new firmware, you need to go to device manager and find the AquantiaDiag Device under Samples and REMOVE IT otherwise your NIC will not show up.

Only install new driver after finishing flash. Your AQC107 will running smoothly.

[Desertum_0]

Only install new driver after finishing flash. Your AQC107 will running smoothly.

Please, do not mislead us.
I have shown pictures that show that you need to remove the Aquantia Diag Service for the NIC to work again,

[toretobcnn]

I have internet cuts with the marvell for no apparent reason, I am desperate! some help?

I have using the driver 2.2.1.0 and the firmware 4.2.29! some help? it is on an asus formula XII

[murenitu]

I read the entire post and I feel like I'm an idiot, it still doesn't clarify ... please can you give me a little help step by step! as simple as possible?

I need to do something since not even formula XII cuts the internet when it wants to.

[kaptanedi]

Attachment 86888

AQUANTIA AQC107 Firmware 4.2.32 Update Guide via DIAG method

Aquantia AQC107 was popular 10G Ethernet NIC devices so there are many tools provide from different OEM for update its firmware.
Due different revision of the chip , different tools may or may not update these NICs chip firmware completely.
There are the original tools call " DIAG " with coming with this link below .

http://www.station-drivers.com/index...306&lang=fr-ca

Step 1 Download above link then exacting it on your download folder.

Attachment 86889

Step 2 You'll see Aquantia Folder enter it

Attachment 86890

Step 3 You'll see AMD64 Folder enter it

Attachment 86891

Step 4 Select All files then place it on C:\AQC107 folder (eg.)

Attachment 86892

Step 5 Open Admin Command Prompt Windows enter C:\AQC107 directory then use DIAG -K command as above picture.

Attachment 86893

Step 6 Choose 3 menu there will be 4 submenu below use 2 Update flash image with your new AQC107.clx firmware file.

Waiting to finish the light of AQC107 port will shutdown don't be worry. Everything done.
exit Windows Admin command then re-install AQC107 driver once.
with Marvell/Aquantia AQtion Network Adapter Drivers Version 2.2.1.0 WHQL

http://www.station-drivers.com/index...553&lang=fr-ca

Your NICs will update as first picture and run smoothly.
Any question please left your comment below.
Have a nice days all. Sorry to late reply everyone due testing Icelake SP system with Intel teams.

Hello, I am writing on an old topic. please help. aquantina diag update didn't work. marvel has disappeared. I uninstalled aquantiadiag device. Marvel has arrived. but the device is not calling. it gives code 10 error. Installing or uninstalling drivers doesn't work. Is the device bricked?