cancel
Showing results for 
Search instead for 
Did you mean: 

Android TV 9 won't connect to Wi-Fi 5Ghz ac

gsantosoliver
Level 7
Hi,

I have 2 Asus Routers connected to each other using an Ethernet Cable in a iMesh configuration:
- 1 GT-AC5300 firmware 3.0.0.4.384_82037-g0cfb8f0 as master node
- 1 RT-AC1750_B1 firmware 3.0.0.4.386_40558-gc48f410 as a AiMesh node

I've set them up to use Wireless Smart Connect.

I have one TV running Android TV which can't not connect to the wifi network when it is near the node. It was able to connect to the master node. I tried to find in the interface where to change the channel configuration to see if that solves the problem but the only option I can select is AUTO.

What can I do to fix the problem?

Thanks
Gilson
1,972 Views
2 REPLIES 2

wilsondenq
Level 10
gsantosoliver wrote:
Hi,

I have 2 Asus Routers connected to each other using an Ethernet Cable in a iMesh configuration:
- 1 GT-AC5300 firmware 3.0.0.4.384_82037-g0cfb8f0 as master node
- 1 RT-AC1750_B1 firmware 3.0.0.4.386_40558-gc48f410 as a AiMesh node

I've set them up to use Wireless Smart Connect.

I have one TV running Android TV which can't not connect to the wifi network when it is near the node. It was able to connect to the master node. I tried to find in the interface where to change the channel configuration to see if that solves the problem but the only option I can select is AUTO.

What can I do to fix the problem?

Thanks
Gilson


try fix channel
5G ch36 ch149 and 2g 6

ahfoo
Level 13
gsantosoliver wrote:
Hi,

I have 2 Asus Routers connected to each other using an Ethernet Cable in a iMesh configuration:
- 1 GT-AC5300 firmware 3.0.0.4.384_82037-g0cfb8f0 as master node
- 1 RT-AC1750_B1 firmware 3.0.0.4.386_40558-gc48f410 as a AiMesh node

I've set them up to use Wireless Smart Connect.

I have one TV running Android TV which can't not connect to the wifi network when it is near the node. It was able to connect to the master node. I tried to find in the interface where to change the channel configuration to see if that solves the problem but the only option I can select is AUTO.

What can I do to fix the problem?

Thanks
Gilson


You can disable Smart connect. See if you can solved your issue.