0db Fan Strix OC 3090

[fly4beer]

Hi,
Even after performing the BIOS update it's still not working correctly. The problem is with an idling desktop or just surfing, power draw is around 54W. 5120x1440p 240Hz. Temp is around 30 Celsius. Could Asus bump the power draw limit a bit more?

Cpt. Breitling

[pk1209]

Same issue for me... tried changing power setting to adaptive in nvidia control panel but no dice

[Megascrypt]

0 db mode is working strangely on my 3090 OC. On my 32" BenQ 4K monitor sometimes fans will spin for a while by just watching 1080P YouTube video and will spin constantly watching 4K video, even if temperature is 30-32C.

I have updated my Strix Bios to latest and also I have adjusted power management mode to "Adaptive" which seem have better effect then "Optimum Power", yet, still acting this way.

I realize that there are spikes of power draw to 50-100W, but that is for 1-2 seconds, would be nice if Asus would extent the timings of such spikes e.g. 5 seconds or so before the sensor would detect it to avoid the fan spin, just so the next second fans have to stop.

[Megascrypt]

Sorry, I have posted incorrect info, which I have deleted.

My above comment still applies

[Silent Scone@ROG]

Hello,

A further VBIOS update will be coming to address the fan threshold. Expect it to drop on the support pages within an ETA of a month's time.

[pk1209]

Nice one, thanks for the update

[Megascrypt]

Thank you very much for the update

[Blake@ROG]

Dear all,
Please refer to below FAQ for the Fan Stop design for the 30 series card
https://rog.asus.com/support/FAQ/1044879
Thank you.

[Megascrypt]

FAQ's for the 3000 series cards, specifically Strix 3090 don’t always correspond accurately with fan stop design, we need a fix please.

[Megascrypt]

Update:

Between the new BIOS V2 and the latest NVIDIA drivers 460.89, now the 0db mode works as it should