Error code 8 when I insert a new RAM stick

[Etceterae]

I bought a new RAM stick (16 GB DDR4-3200) and now I see the error code 8 on my motherboard when I insert it. How do I fix this?

[Braegnok]

I bought a new RAM stick (16 GB DDR4-3200) and now I see the error code 8 on my motherboard when I insert it. How do I fix this?

Hello,

Can you list your system specs, new stick of RAM model number.

Are you running just the single stick ?,.. Check your motherboard manual to confirm you have the correct memory DIMM slot for running single stick.

Are you mixing this new stick with another kit ?

[Etceterae]

Hello,

Can you list your system specs, new stick of RAM model number.

Are you running just the single stick ?,.. Check your motherboard manual to confirm you have the correct memory DIMM slot for running single stick.

Are you mixing this new stick with another kit ?

Motherboard: Asus ROG Crosshair VI Hero
Power supply: Thermaltake Smart 430W 80+
Fan & heatsink: Noctua NH-D15S
RAM: Patriot Viper Steel 16 GB DDR4-3200
Processor: AMD Ryzen 7 1800X
Graphics Card: MSI GTX 1660 Super
Hard Drive: HP MB2000GCWDA 2 TB

[Etceterae]

Motherboard: Asus ROG Crosshair VI Hero
Power supply: Thermaltake Smart 430W 80+
Fan & heatsink: Noctua NH-D15S
RAM: Patriot Viper Steel 16 GB DDR4-3200
Processor: AMD Ryzen 7 1800X
Graphics Card: MSI GTX 1660 Super
Hard Drive: HP MB2000GCWDA 2 TB

Hello?

[Braegnok]

Based on the questions I asked above, your only running single stick of RAM, in DIMM slot A2.

And everything was running fine before you bought a new stick of RAM, all you did was replace the one stick of RAM and now your getting Code 08.

Try removing and resetting the new RAM stick, confirming you have it in DIMM slot A2,.. insuring the module clicks into slot, is firmly seated with tabs in place.

Reset CMOS and see if that resolves issue.