cancel
Showing results for 
Search instead for 
Did you mean: 

ROG Rampage VI Apex / NV FE 3090 , Bios from 3006 to 3201, impact on fps

scryed
Level 9
hi and greetings from germany

as first sorry for my engl but i hope this is understanable , so i did a update from bios v3006 to 3201 , no problems with the update , had no problems with 3006 and also 3201 works fine so far

did no major changes within the bios while i was on 3006 and now 3201 both have the same settings allmost everything is stock , only xmp was switched on and turned of some rgb , and i made sure the every other setting within the bios is the same

this bios had a major impackt on my frames i lost round 2000 graphics score benchmarking 3dmark time spy

https://www.3dmark.com/compare/spy/15099206/spy/15270022/spy/15270325/spy/15271370/spy/15273848/spy/...

this 8 benchmarks show , the first to the left is on 3006 , the next 6 are 3201 , the last to the right is the second bios on my board what i updated to 3006

the same witth other benchmark for example the valley benchmark , the left is 3006 and the right is 3201

86854


my pc settings

ASUS ROG Rampage VI Apex
Ram 32 gig quad kit 3000mhz
nvidia 3090 fe

as first i thougt the while on the new bios the pcie x 16 3.0 dosent work fine , while running a game ans also gpu-z it jumped to 16 3.0 but sometimes it diped down to 2.0 ........ i tought nothing of it may the dip is when the card is not pushed enough .... this dips are just a part of a second went down and right backl up so i think this is normal behavior

edit

like i said i compared both bios setting i did with 3006 and 3201 everything is set so the same .
5,623 Views
24 REPLIES 24

lLegendaary
Level 9
they will never care about us .

scryed
Level 9
maybee i should fill the Bug Form.... I did post this while hoping some mods would see this, i hope they do

gamingarena
Level 7
scryed wrote:
hi and greetings from germany

as first sorry for my engl but i hope this is understanable , so i did a update from bios v3006 to 3201 , no problems with the update , had no problems with 3006 and also 3201 works fine so far

did no major changes within the bios while i was on 3006 and now 3201 both have the same settings allmost everything is stock , only xmp was switched on and turned of some rgb , and i made sure the every other setting within the bios is the same

this bios had a major impackt on my frames i lost round 2000 graphics score benchmarking 3dmark time spy

https://www.3dmark.com/compare/spy/15099206/spy/15270022/spy/15270325/spy/15271370/spy/15273848/spy/...

this 8 benchmarks show , the first to the left is on 3006 , the next 6 are 3201 , the last to the right is the second bios on my board what i updated to 3006

the same witth other benchmark for example the valley benchmark , the left is 3006 and the right is 3201

86854


my pc settings

ASUS ROG Rampage VI Apex
Ram 32 gig quad kit 3000mhz
nvidia 3090 fe

as first i thougt the while on the new bios the pcie x 16 3.0 dosent work fine , while running a game ans also gpu-z it jumped to 16 3.0 but sometimes it diped down to 2.0 ........ i tought nothing of it may the dip is when the card is not pushed enough .... this dips are just a part of a second went down and right backl up so i think this is normal behavior

edit

like i said i compared both bios setting i did with 3006 and 3201 everything is set so the same .


You made me curious we have almost identical systems but i'm still on 2002 Bios cause that is the only one that has TSX support everything beyond that TSX its disabled.

Here is my score for Valley with same 3090FE GPU and RVI Apex

86861

SirWaWa
Level 7
X299-XE with 7820x on 3201 and TSX detected on latest cpu-z 1.94

SirWaWa wrote:
X299-XE with 7820x on 3201 and TSX detected on latest cpu-z 1.94


Not for 10980xe only for 7xxx

scryed
Level 9
Forgot to mention this my CPU is a 10940x at Stock also the gpu is stock, for TSX i can Look for IT later this Day

@gamingarea could you run 3d Mark timespy

scryed wrote:
Forgot to mention this my CPU is a 10940x at Stock also the gpu is stock, for TSX i can Look for IT later this Day

@gamingarea could you run 3d Mark timespy


https://www.3dmark.com/spy/14368879

Also please let me know if TSX is enabled for you. Thanks

Hello,

In this version of the bios I have the same problem as in 3105. The processor has much higher temperatures under load, which means it has to reduce its clock speed. This is clearly visible on the screens I attached to the report with the BIOS 3105:

https://rog.asus.com/forum/showthread.php?120077-BIOS-3105-for-X299-mobos-has-anyone-tried-that/page...

In the 3006 version, the results were significantly better due to much lower temperatures under full load. This is definitely a problem for verification by ASUS engineers.

My system:
ASUS STRIX X299-E GAMING
Intel i7 7820X processor
RAM memory G.SKILL Trident Z RGB 4 x 16 GB 3600 MHz 17-19-19-39-2T 1.350V @ 3600 MHz 16-19-19-39-1T 1.350V
CPU cooler Scythe Fuma 2 + Thermal Grizzly Kryonaut
PC housing EVGA DG-87 + 8 x 140 mm fans

FireRx
Level 11
welp, that answers my question. Staying right on the bios I am now on. these new ones I come here to find how it going for others first before I update. I have a RTX 3090 FE too. I don't want to lose any performance gains I have now.

Thanks, Guys!
Intel Core i9 103900KS
Asus Maximus Z790 Extreme [bios 1801]
LG (34U97-s) Monitor 3440 x1440
Nvidia RTX 3090 FE
Windows 11 Pro
64gbz Memory