Results 1 to 10 of 10
  1. #1
    ROG Member Array
    Join Date
    Apr 2019
    Reputation
    10
    Posts
    13

    TUF-GAMING-X570-PLUS-ASUS 3001Bios PCH issues?

    So I know this is a TUF mainboard but still its from Asus and I did not find any other forum to post about this issue so I hope its okey.

    ISSUE:
    I had an Ryzen 3600x and no problems with the PCH fan.
    Recently I updated my bios and changed my CPU to a 5900x.

    It is a x570 motherboard with real nice VRMs but two heat sensors freak out now and therefore the PCH fan jumps instantly to over 3000rpm which is reaaaaly loud...

    I will add as much screenshots as possible to show my setup. Is this a hardware issue or a bios issue?

    Sensors:




    My setup: (PCH unblocked)


    Has anyone similar issues?
    Last edited by rufreakde; 12-19-2020 at 05:24 PM.

  2. #2
    ROG Member Array
    Join Date
    Apr 2019
    Reputation
    10
    Posts
    13

    Just saw that there is a new bios version Version 3001(I will update the title)
    2020/12/08

    So I updated but seconds after starting COD Warzone similar temp levels...


  3. #3
    ROG Member Array
    Join Date
    Apr 2019
    Reputation
    10
    Posts
    13

    What is the TSI0 sensor for?

  4. #4
    ROG Member Array
    Join Date
    Apr 2019
    Reputation
    10
    Posts
    13

    Additional Information on settings:
    Ryzen Master CPU to ECO mode - 87 Watts
    DOCP on

    What I tried:
    Every PCIe Gen to 3.0 = this seemed to help with TSI0 temperature?

  5. #5
    ROG Member Array
    Join Date
    Apr 2019
    Reputation
    10
    Posts
    13

    Additional Information on settings:
    Ryzen Master CPU to ECO mode - 87 Watts
    DOCP on

    What I tried:
    Every PCIe Gen to 3.0 = this seemed to help with TSI0 temperature?

  6. #6
    ROG Guru: Brown Belt Array RedSector73 PC Specs
    RedSector73 PC Specs
    Laptop (Model)FA506IU-AL130T x 2
    MotherboardROG CROSSHAIR VIII HERO (WI-FI)
    ProcessorAMD Ryzen 9 3900X 12-Core Processor
    Memory (part number)4 x G.SKILL F4-3800C14D-16GTZN 14-16-16-36 Samsung B-Die
    Graphics Card #1Gigabyte Aorus RTX 2080 Ti Xtreme WaterForce (GV-N208TAORUSX W-11GC)
    Sound CardArctis DAC
    MonitorAsus ROG Swift PG348Q
    Storage #1ADATA SX8200PNP 1TB
    Storage #22 x Samsung SSD 840 EVO 250GB
    CPU CoolerCoolermaster Liquid Pro Master 360
    CaseEVGA DG-87 Gunmetal Grey Gaming Case
    Power SupplyEVGA SuperNOVA G2 750W Gold Power
    Keyboard Corsair K95 RGB Platinum
    Mouse Corsair Gaming Sabre RGB Gaming Mouse
    Headset ARCTIS Pro Wireless
    Mouse Pad Cooler Master MP750 RGB Cloth Gaming Mouse Pad Extra Large
    OS Windows 10 64bit Pro
    Network RouterRT-AC87U

    Join Date
    Apr 2018
    Reputation
    42
    Posts
    1,030

    I wonder if this is an effect from using the second PCIe for GPU and not having anything like for instance the GPU which is normally in the first. This normally halves the PCIe lanes to GPU (not sure if you noticed this effect x8 instead x16 ?)

    Quote Originally Posted by rufreakde View Post
    Every PCIe Gen to 3.0 = this seemed to help with TSI0 temperature?
    So running PCIe Gen3 reduces the heat output vs PCIe GEN4 ?

  7. #7
    ROG Member Array
    Join Date
    Apr 2019
    Reputation
    10
    Posts
    13

    Quote Originally Posted by RedSector73 View Post
    I wonder if this is an effect from using the second PCIe for GPU and not having anything like for instance the GPU which is normally in the first. This normally halves the PCIe lanes to GPU (not sure if you noticed this effect x8 instead x16 ?)


    So running PCIe Gen3 reduces the heat output vs PCIe GEN4 ?
    I had the card in the first slot first but the temps where equally bad so I googled and people sugested to move it since the card can "choke" the fan. I looked into my case and saw that indeed the fan was closed off a little by my card. The hope was that more fresh cool air would be sucked in by the small fan there.

    As for the change to GEN3 from GEN4 it did not change the mobo chipset temps much but the TSI0 temps where reduced so that the PCH fan now averages at around 2k rpm.

    I am still confused what the issues here is I mean even in idle the chipset is at around 70 degrees C. That was not like that before the bios update and my ryzen 3600x.

  8. #8
    ROG Member Array
    Join Date
    Apr 2019
    Reputation
    10
    Posts
    13

    Ah also the mobo has 2 16x PCIe slots so the performance should not suffer ( at least in warzone I did not see any performance degredation after the switch)

  9. #9
    ROG Guru: Brown Belt Array RedSector73 PC Specs
    RedSector73 PC Specs
    Laptop (Model)FA506IU-AL130T x 2
    MotherboardROG CROSSHAIR VIII HERO (WI-FI)
    ProcessorAMD Ryzen 9 3900X 12-Core Processor
    Memory (part number)4 x G.SKILL F4-3800C14D-16GTZN 14-16-16-36 Samsung B-Die
    Graphics Card #1Gigabyte Aorus RTX 2080 Ti Xtreme WaterForce (GV-N208TAORUSX W-11GC)
    Sound CardArctis DAC
    MonitorAsus ROG Swift PG348Q
    Storage #1ADATA SX8200PNP 1TB
    Storage #22 x Samsung SSD 840 EVO 250GB
    CPU CoolerCoolermaster Liquid Pro Master 360
    CaseEVGA DG-87 Gunmetal Grey Gaming Case
    Power SupplyEVGA SuperNOVA G2 750W Gold Power
    Keyboard Corsair K95 RGB Platinum
    Mouse Corsair Gaming Sabre RGB Gaming Mouse
    Headset ARCTIS Pro Wireless
    Mouse Pad Cooler Master MP750 RGB Cloth Gaming Mouse Pad Extra Large
    OS Windows 10 64bit Pro
    Network RouterRT-AC87U

    Join Date
    Apr 2018
    Reputation
    42
    Posts
    1,030

    The PCH chipset can run a lot hotter, would not bother caring about it till well in high 80's or actually hit a shutdown from temp.
    I've done posts about temps on it before, search a find them. Not going over it all again, dont have time, games to play.

    I would not put the GPU in second slot. The temp of PCH is within normal.
    Last edited by RedSector73; 12-21-2020 at 05:19 AM.

  10. #10
    ROG Member Array
    Join Date
    Apr 2019
    Reputation
    10
    Posts
    13

    I mean okay it might be in range of "normal" but the PCH fan is sooooo damn loud it is like crazy. I will try to mod the mainboard I guess after my fans arrive.
    Thanks for the feedback.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •