Results 1 to 2 of 2
  1. #1
    New ROGer Array
    Join Date
    Dec 2020

    Post 9900k OC SVID Behavior interaction Manual vs Adaptive?

    Hi Everyone, I'm new to the forums but have been reading lots. Thank you all for your posts, super helpful!

    Recently I've gotten a 9900k at 5.0ghz No AVX Offset stable using 1.375v manual/locked voltage on a XI HERO. LLC 5. Cache 45.

    I also have SVID enabled with Best Case Scenario. I've read in a few places that SVID is used more for Adaptive setups but I don't understand the interaction.

    My questions are these:

    Can SVID be used in Manual/Locked voltages? Is there any issues or benefits to be aware of?

    Should I consider an Adaptive setup? Why or Why not?

    Any replies would be super apricated. If there's any questions about my setup please let me know.


  2. #2
    ROG Guru: Yellow Belt Array Carlyle2020 PC Specs
    Carlyle2020 PC Specs
    MotherboardAsus Maximus XI APEX
    Processorgaming9900ks@5.2/avx 0/ adaptive vcore / 1.35+0.020 offs/LLC5/ac ll 0.01/TVB off/power saving on
    Memory (part number)Gskill 4400 CL16 /65k r /65k w / 60k c
    Graphics Card #13080 ftw ultra /pads on backplate
    Sound CardXonar STXII mods:3xLME 49720NA
    MonitorLG 38GL950G / -HDR / +madVR
    Storage #12TB 970evo plus nvme
    Storage #21TB 960evo nvme +2x 1tb evo 860 hw-sata-raid
    CPU Coolerarctic freezer II 280
    CaseUnique Silverstone FT2 dampened up the wazoo V2.0
    Power SupplySeasonic TX-850
    Keyboard Cherry KC 1000 on top of a cherry MX1 for ergonomics :)
    Mouse MX Master 3
    Headset Sennheiser PC360 + Philips X2HR
    Headset/Speakers A250 / cause LG was stingy
    OS Win 10 64bit
    Network Routeryeah right...
    Accessory #1 Silverstone EBA01 headphone stand / black
    Accessory #2 radio Keyfob to turn on and off
    Accessory #3 4 bay fantec /10tb red/+scrap

    Join Date
    Mar 2018

    Adaptive runs cooler in idle, so why not?

    In short:
    SVID is like voltage cheat table.
    You of course try to use the best cheat table first - best case cenario.
    It uses the least amount of voltage for the given multiplier.
    But the rig and the componenst must be up to the task.

    Set Adaptive 1.35 + 0.025 offset and check HWinfo before and after in idle and on load.

    Set this to produce less heat:
    Systen Agent - 1.2
    Vccio 1.25
    Less than Auto - should be enough, still

    Test out:
    A/C loadline: Auto VS 0.01 - helps to crop the cheat table a bit = less heat but maybe instability.

    Test out: AI Cooler points: set to 165 and lock it.
    Simply to have the same readouts in the bios concerning the voltage prognosis (lower right corner) - since you are testing.
    Last edited by Carlyle2020; 12-31-2020 at 04:14 PM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts