Results 1 to 2 of 2
  1. #1
    New ROGer Array
    Join Date
    Mar 2018
    Reputation
    10
    Posts
    3

    z390-e STRIX VCCIO + VCCSA Voltages

    Does anyone know why the bios would override manual inputs for these voltages? See pics below.

    I've dialed in stable CPU and memory overclocks. OCCT for system stability and HCI MemtestPro for memory stability (400% coverage with current 17-19-19-39 @ 4133mhz, testing 30 of 32gb available). CPU is a 9700k, 5.1ghz all cores, 48 uncore.

    I've been playing around with voltages and discovered some weird things happen when they are too low or high.

    Too low VCCIO/SA voltages result in higher core temps 2-4ºC, memtest initializing slower and not testing all available RAM.
    Setting voltages to to 1.25v and the BIOS runs them at 1.28v, which appear to be too high imo.
    Manual inputs of 1.24v override to 1.24375 but actually run at 1.264v. Believe it or not, cores actual run several degrees cooler with these higher voltages, and memtest runs quicker, utilizing available memory.

    Any experts willing to chime in?









    Last edited by warreng090; 01-02-2021 at 07:21 PM. Reason: typo's

  2. #2
    Administrator Array Silent Scone@ROG's Avatar
    Join Date
    Mar 2016
    Reputation
    170
    Posts
    2,186

    Hello,

    The UEFI is not overiding them, it's simply how it's being interpreted depending on how and where the voltage is being read from.

    You can safely volt these rails up to 1.3 so set a value that works best for stability. As these are signal rails, sometimes too much voltage can be detrmental to stability - so test methodically.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •