Results 1 to 1 of 1
  1. #1
    New ROGer Array CuzDawg3 PC Specs
    CuzDawg3 PC Specs
    MotherboardMaximus XI Formula
    Memory (part number)F4-3600C16Q-32GTZR
    Graphics Card #1ROG Strix 3090 OC
    Sound CardSoundBlaster 16
    Storage #1Evo 970 m.2
    Storage #2Evo 970 m.2
    CPU CoolerEKWB custom loop
    CaseThe Tower 900
    Power SupplySeasonic 1000W
    Keyboard Kingston HyperX
    Mouse Logitech G700s
    Mouse Pad some cheapo thing
    OS Win 10 Pro
    Accessory #1 Oculus Rift S
    Accessory #2 Lotsa joysticks, pedals, and yokes

    Join Date
    Jan 2021

    Maximus XI Formula - Dual water loop control in BIOS?

    Hey folks,

    Finally finished my dual loop build, and am trying to determine a good way to control the rad fans and pumps via BIOS. Everything is PWM. I'm on BIOS 1802. Currently I have the following set for each loop:
    CPU fan -> CPU/CRM pump
    Chassis fan 1 -> CPU/VRM rad fans
    Chassis fan 2 -> GPU rad fans
    Chassis fan 3 -> case exhaust fans
    WATER_PUMP+ -> GPU pump

    I also have 3 phobya 10kOhm water temp sensors set as follows:
    W_IN -> CPU block outlet
    W_OUT -> CPU rad outlet
    T_SENSOR -> GPU rad outlet

    I have a Strix 3090 OC, and was hoping that the BIOS would be able to see the GPU temp since it's visible in Win10 all over the place (GPU TweakII, HW monitor, speccy, etc). That way I can use Q-fan to read the GPU temp for the inputs driving the Chassis fan 2 and WATER_PUMP+. Anyone do anything like this?

    system info and a piccy of the box:
    Click image for larger version. 

Name:	compy.JPG 
Views:	0 
Size:	85.2 KB 
ID:	87493Click image for larger version. 

Name:	CPU-z.JPG 
Views:	5 
Size:	60.9 KB 
ID:	87494Click image for larger version. 

Name:	GPU-z.JPG 
Views:	0 
Size:	70.4 KB 
ID:	87495

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts