Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

I can't get my ram to 3600 & that's what's it should be

The_Gaige
Level 9

‎01-13-2021 09:38 PM - last edited on ‎03-05-2024 07:11 PM by Community Admin

Links to my hardware

Motherboard: https://www.newegg.com/asus-rog-crosshair-viii-hero/p/N82E16813119109

RAM: https://www.newegg.com/g-skill-32gb-288-pin-ddr4-sdram/p/N82E16820232861?Item=N82E16820232861

CPU: https://www.newegg.com/amd-ryzen-7-3700x/p/N82E16819113567

My RAM is at 2100

I have my CPU to 4.4
My Rig: http://pcpartpicker.com/p/zggNFT
My Wife's Rig: http://pcpartpicker.com/p/vLNT99
My Kid's Rig: http://pcpartpicker.com/p/Kz4mHx
0 Kudos
1,241 Views
6 REPLIES 6

The_Gaige
Level 9

‎01-14-2021 01:06 AM

no one wants to help
My Rig: http://pcpartpicker.com/p/zggNFT
My Wife's Rig: http://pcpartpicker.com/p/vLNT99
My Kid's Rig: http://pcpartpicker.com/p/Kz4mHx
0 Kudos

ffletchs
Level 10
In response to The_Gaige

‎01-14-2021 03:48 AM

More info would be nice, what settings have you tried? what bios are you running?

when you say "what's it should be", do you mean its not stable or does it not post?

You can try to increase the VDIMM and SOC voltages a little bit
0 Kudos

The_Gaige
Level 9

‎01-14-2021 07:36 PM

I have Bios 3102 the most stable I can get is 3200mhz for the ram and 45 for the cpu

the SOC voltage is 1.1

the ram should be 3600mhz
My Rig: http://pcpartpicker.com/p/zggNFT
My Wife's Rig: http://pcpartpicker.com/p/vLNT99
My Kid's Rig: http://pcpartpicker.com/p/Kz4mHx
0 Kudos

Silent_Scone
Super Moderator

‎01-15-2021 01:35 AM

Hello,

Try

VSOC up to 1.18v. IOD VDDG around 1 to 1.05 and CCD around 0.98 to 1.05.

You can also try increasing VDIMM to 1.38-1.1.4v
13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090
0 Kudos

Shamoo
Level 7
In response to Silent_Scone

‎01-15-2021 07:27 AM

I had that exact kit and found it was selective on BIOS versions... Worked fine until I updated to the recent BIOS builds. The last 2 wouldn't post at all with 3600 for me. I could only post at default JEDEC DDR4 speeds. I ended up selling it to a Ryzen user and switching to Samsung B Die.

That kit is better served with Ryzen. Asus didn't really do much testing, if any, with that particular Hynix kit on intel platforms.
0 Kudos

Gaming247
Level 7
In response to Shamoo

‎01-17-2021 05:14 PM

i had ram showing 3466mhz and when i started my PC it showed around 2000mhz frequency. I was able to get it to what the package said by going into bios and changing a setting so it uses DOCP configuration/profle. This sets up the RAM to work at its full potential.
0 Kudos