Possible DOCP issues Rog Strix-E

[firewithin]

so i completed a new build a few weeks ago and the MB is the x570 Rog Strix-E with a 5800x. I have 32gb for (2x16) 3600 ram installed. the MB first came with the 2606 bios loaded on it and when i enabled the DOCP profile (everthing else in the pc is stock ie cpu, gpu, etc) and when i rebooted i got the yellow DRAM led light and it would post.

I flashed the bios to the latest version and it was able to post again but i havent enabled DOCP again because im not sure how i get back in if it give me the DRAM led again.

Would the latest bios version have helped with this issues if i try and enable again?

[Silent Scone@ROG]

Hello,

Set memory frequency and primary timings manually and set VSOC to 1.15v

IOD VDDG around 1.05v and CCD around 0.98v.

See if the issue persists.

[dave798]

Hello,

Set memory frequency and primary timings manually and set VSOC to 1.15v

IOD VDDG around 1.05v and CCD around 0.98v.

See if the issue persists.

am having same issues, can you tell me where in the bios to find the settings you suggest to remedy this situation