Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Possible DOCP issues Rog Strix-E

firewithin
Level 7

‎01-18-2021 03:56 PM - last edited on ‎03-05-2024 07:10 PM by Community Admin

so i completed a new build a few weeks ago and the MB is the x570 Rog Strix-E with a 5800x. I have 32gb for (2x16) 3600 ram installed. the MB first came with the 2606 bios loaded on it and when i enabled the DOCP profile (everthing else in the pc is stock ie cpu, gpu, etc) and when i rebooted i got the yellow DRAM led light and it would post.

I flashed the bios to the latest version and it was able to post again but i havent enabled DOCP again because im not sure how i get back in if it give me the DRAM led again.

Would the latest bios version have helped with this issues if i try and enable again?
0 Kudos
1,274 Views
2 REPLIES 2

Silent_Scone
Super Moderator

‎01-25-2021 01:42 AM

Hello,

Set memory frequency and primary timings manually and set VSOC to 1.15v

IOD VDDG around 1.05v and CCD around 0.98v.

See if the issue persists.
13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090
0 Kudos

dave798
Level 9
In response to Silent_Scone

‎01-25-2021 05:50 AM

Silent Scone@ROG wrote:
Hello,

Set memory frequency and primary timings manually and set VSOC to 1.15v

IOD VDDG around 1.05v and CCD around 0.98v.

See if the issue persists.


am having same issues, can you tell me where in the bios to find the settings you suggest to remedy this situation
0 Kudos