Armoury crate v3.3.7.0 [report here if any issues]

[FlufflePuff1337]

[AJLWalton]

Just a quick update: we will have a manual update option for Armoury Crate soon as requested by you guys.

Have you tried the performance mode?

Yes i have tried Performance mode as well, but to no avail

[Affekt1]

The latest version of the Aura Sync utility 1.07.84 does not see the illumination of the profile motherboard and thermaltake case fans.

[Melkesideck]

Armoury Crate V3.3.7.0

ISSUE:

Operating System
Windows 10 Pro 64-bit
CPU
Intel Core i9 @ 3.50GHz 30 °C
Skylake Technology 11900K
RAM
32.0GB
Motherboard
ASUSTeK COMPUTER INC. ROG STRIX Z590-E GAMING WIFI (LGA1200) 34 °C
Graphics
38GL950G (3840x1600@120Hz)
24GB NVIDIA GeForce RTX 3090 (ASUStek Computer Inc) 49 °C
Storage
9314GB Seagate ST10000VN0008-2PJ103 (SATA ) 31 °C
3726GB Samsung SSD 870 QVO 4TB (SATA (SSD)) 26 °C
931GB Samsung SSD 980 PRO 1TB (Unknown (SSD))
Optical Drives
No optical disk drives detected
Audio
High Definition Audio Device

When i click "Tools" Armoury Create crashes.

Reinstalled windows (fresh install from bios) did all updates, installed GPU driver NVIDIA.
Downloaded Armoury crate installer Version 3.0.11.0 from support ASUS
After install i opened it and, clicked on Tools and then it crashed!
Also GPU will not sync with corsair software latest version.
Reinstalled windows "again" and installed AURA (latest version) and ICE (latest version) and all working like clock work no problems with syncing RGB etc

As ASUS will soon force us to use Armoury Crate as AURA will stop receiving updates soon so all these issues need to be resolved.
sorry for sideways photo
Cheers

[AJLWalton]

JUST UPDATED TODAY 5/3/21 TO LATEST ARMOURY CRATE INTERNA UPDATES, BUT GSKIL RGB RANDOM FLASHING PROBLEM STILL EXIST. I JUST LIKE TO POINT OUT THAT THIS IS ON A 900 DOLLAR+ THREADRIPPER TRX40 M/B ZENITH ii EXTREME ALPHA

Any fix to clear this problem will be most appreciated, Thank you

[FlufflePuff1337]

JUST UPDATED TODAY 5/3/21 TO LATEST ARMOURY CRATE INTERNA UPDATES, BUT GSKIL RGB RANDOM FLASHING PROBLEM STILL EXIST. I JUST LIKE TO POINT OUT THAT THIS IS ON A 900 DOLLAR+ THREADRIPPER TRX40 M/B ZENITH ii EXTREME ALPHA

Any fix to clear this problem will be most appreciated, Thank you

Yeah same its really annoying, i managed to fix it my self by deleting the asus rgb driver and replacing it with one from g skill but you really have to delete asus one, you dont want 2 rgb drivers to run at same time especially knowning the spd corruption issues that can occur with poor rgb software that could potentiantly be caused by these drivers as well.

[AliAPCMR]

Hi guys I have a on going issue where when i set my prefered settings and turn the pc for over night and then the next morning when i wake up to use my pc, the RBG has turned to rainbow dispite the fact i had enabled a static colour. But if i re do my settings and turn of the pc and flip the switch on the mains and turn thr pc on after say a few hours or minutes everything works as it should, its like if i leave the pc off for a lengthy period of time the RGB settinsg reset. I am getting annoyed waking up every morning looking at rainbow puke

[Foxseiz]

This update didn't do anything, to be honest, my GPU (RTX 3090) and RAM (G.Skill Trident Z RGB) are still not available to be controlled. You can see it in the device list but not in AURA Sync...



I paid $2k+ CAD for a GPU that you can't even control the lighting... tsk tsk.

[JeffLo]

every few days i have to uninstall amoury crate and reinstall again, or do a bunch of things to make it work again to control argb, its really annoying

[cindernat]

Why is there not a sticky for the latest version of A.C.?

Anyway I've always had the occasional issue with A.C (not remembering settings, etc) but last week, when I went in to make a change I was force to do some device updates (not sure which, but I have 5 Aura devices). After that, my RGB went to default settings and weren't showing anymore in A.C. I've read tonnes of threads and tried everything, best I can get is 2/5 devices being recognised and controllable in A.C - the rest stuck in rainbow.

Had no response from Asus from my problem ticket and I can't even view it, when I put my email address in, nothing happens. Very frustrating from Asus.