Armoury crate v3.3.7.0 [report here if any issues]

[TSportM]

@MasterC@ROG

Hello do you have a ETA on the fix for the problem i and others are presenting rog spotlight is gone not showing and is not cycling colors ?


regards

[IzzIsHOr]

Besides all the other problems I've written in the other threads that got no answer and just got closed because "A NEW VERSION CAME OUT"

Can literally anyone help me with MUSIC MODE on Armory Crate, STRIX B550 E.
It only works if either I disable ENHANCEMENTS (which I lose bass and surround and it sounds just crap)
Or if I change my speaker setup from 5.1 SURROUND to STEREO.

Haven't figured a way to have MUSIC MODE to work with 5.1 analog sound....
HELP? ANYONE? )

Latest software, drivers, bios, etc, however it never worked with 5.1, no matter if I had older versions.

[Erwin05]

I reported this in the older thread, but with the latest version the language is still in French.


https://rog.asus.com/forum/showthrea...ge3#post819833

[flyinion]

So after the update to this current version added in trying to control my EVGA video card (which does NOT work) and that somehow corrupted my video driver I ended up using the uninstall tool to remove AC and Creator and went back to Aura Sync. That lasted a week after I realized it was causing random BSOD's once a day or more (last one on Sunday was so bad Windows almost couldn't recover and I only fixed by shutting the PC off fully and turning back on). So I removed that, waited two days to verify no BSOD, and put Armoury Crate/Aura Creator back on. Seems to be working "ok" for now.

I've noticed a weird issue though. Setting LED count for my ARGB headers is not working anymore. Previous versions of armoury crate I had strip 2 set to 6 and as you increased from 1-6 you could see a new LED on each of the 4 Fractal Prisma fans I have that are daisy chained light up. Strip 1 has my case's Phanteks RGB hub attached to it which has an LED ring from my reservoir, the built in light strips in the case, and 3 front Prisma fans connected to it. Setting that to 42 used to be the exact number to get all of them to light up. Now no matter what I set Strip 1's count to, nothing changes. However Strip 2 LED count seems to be affecting BOTH headers. I.e. if I set it to 6 to match the Prisma fans connected to it, a large number of LED's on the other header shut off. Setting it to that 42 number lights them all up as expected but that's not the right header in the software.

Yes I rebooted after install and "check for updates" which installed an update for the memory ARGB, then rebooted again.

Here's the HAL/etc. info from "Service Version" on the About tab.
Item Version
---- -------
Armoury Crate UWP App 3.3.7.0
ROG Live Service 1.1.16.0
AURA Service (Lighting Service) 3.04.32
Armoury Crate lite service 3.3.7
ASUS AIOFan HAL 1.1.16
ASUS AURA Extension Card HAL 1.0.24
ASUS AURA Motherboard HAL 1.0.69.0
AacVGA 0.0.3.1
KingstonDram 1.0.28
AURA DRAM Component 1.1.06
ENE RGB HAL 1.1.28.0
PHISON HAL 1.0.6.0
Patriot Viper DRAM RGB 1.0.9.1
Patriot Viper M2 SSD RGB 1.0.6.3
Universal Holtek RGB DRAM 1.0.0.1
WD_BLACK AN1500 1.0.12.0

[FlufflePuff1337]

@flyonion exact issue for me with argb headers, if i set 1 to 21 the other one will be set to 21 also im so frustated by it.
Usually i set one to 21 the other one to 56 so the rgb scales perfectly so for example my fans have 7 leds i could set it to 7 but i multipli it by 3 and set it to that so it spreads the effect properly not to mention it looks better that way, but now i have to set it to 42 so making it so that colors on my fans don't match in size anymore which is so annoying, meaning to not notice that i have to set it on pink to purple pattern for rainbow to not notice that.

[acofalc]

So after new update, Armoury Crate and Aura Sync dont detect my Rog Gladius 2.
Aura sync is showing only some generic mouse in devices...even when rog gladius is disconnected.

https://imgur.com/TnTynL1

[erumali1123]

For the past few days, I have been trying to update the HAL on my video card. Armoury Crate runs the update, it shows as updated with the current date for a few seconds, then reverts to displaying the previous date with the UPDATE button again active. I have already uninstalled AC and all the usual Aura-related programs and restarted, then reinstalled with the latest version, but still get the same issue. I can't find if there might be a separate download of the HAL update I can try to apply.

Per the thread instructions:

1. PC
2. Aura Sync products: ROG STRIX Z490-E GAMING motherboard, ROG STRIX SCOPE TKL keyboard, ROG CHAKRAM mouse, ROG DELTA headset, ROG THRONE QI headset stand, ROG-STRIX-2080TI video card
3. 3rd-party peripheral, audio, or lighting software: none
4. Wired connection
5. Reinstalled Windows: About 2 months ago
6. Windows version & build: Windows 10 PRO version 20H2 build 19042.746
7. Previous version of firmware or software that worked as expected: Armoury Crate 3.2.4.0 / HAL listed for video card is version 0.0.3.1 date 2020/11/19
8. Clear description of your issue: SEE ABOVE
9. Any screenshots of the issue



10. Log file will be provided to MASTERC@ROG by PM as instructed

[Huffel]

My logfile is now PM'd to MasterC@ROG

[klotim]

Armory crate services is crashing everyday multiple times.
Also why do you have so many services? I never seen any other software have so many.

Latest windows 10 and update. Latest drivers.

Item Version
---- -------
Armoury Crate UWP App 3.3.7.0
ROG Live Service 1.1.16.0
AURA Service (Lighting Service) 3.04.32
Armoury Crate lite service 3.3.7
ASUS AIOFan HAL 1.1.16
ASUS AURA Extension Card HAL 1.0.24
ASUS AURA Motherboard HAL 1.1.4.0
ASUS Keyboard HAL 1.01.44
ASUS Mouse HAL 1.1.0.34
AacAudioHal 1.3.21.0
AacVGA 0.0.3.1
KingstonDram 1.0.28
AURA DRAM Component 1.1.06
ENE RGB HAL 1.1.28.0
PHISON HAL 1.0.6.0
Patriot Viper DRAM RGB 1.0.9.1
Patriot Viper M2 SSD RGB 1.0.6.3
Universal Holtek RGB DRAM 1.0.0.1
WD_BLACK AN1500 1.0.12.0

[orphicpixel]

Armory crate services is crashing everyday multiple times.
Also why do you have so many services? I never seen any other software have so many.

Where I can view this?