01-22-2021 02:58 AM - last edited on 03-05-2024 07:09 PM by ROGBot
01-22-2021 06:41 AM
01-22-2021 12:23 PM
KMagic wrote:
You said it worked on displayport with driver uninstalled, so we know possible driver issue. I would do the following:
Put HDMI connection on. Boot into safe mode. Run DDU to completely remove all traces of display driver. Once that is done shut down pc. Swap to Display port - do not leave HDMI Plugged into video card at all. Display port should work as you boot into windows. Once in windows install new fresh gpu driver. Hopefully it works.
01-22-2021 01:27 PM
BurnStrike wrote:
I tried exactly as you said but once the driver is installed I get "Displayport no signal"
02-03-2021 06:24 AM
KMagic wrote:
Have you tried running both hdmi and displayport cable to the monitor at the same time? Can you try to see what resolution and refresh rate it is trying to send over the display port? Do you have a 2nd cable to try? Sounds odd...On its face, it would suggest the cable is the problem. I run all my monitors with display port. Never had an issue across multiple different monitors and video cards.
is the monitor set to max refresh rate and etc in its settings? The only time you should get no signal is if the cable is bad, or if the signal being sent to the minitor is out of bounds - like trying to display a resolution that isnt compatiable, or trying to display a refresh rate that is too high. Go into minitor settings on the actual monitor, look for refresh rate when its on display port, make sure its all set up to match your settings on HDMI. Try disabling gsync/freesync. If all fails Id try a new cable.