Results 1 to 5 of 5
  1. #1
    New ROGer Array The Gecko PC Specs
    The Gecko PC Specs
    MotherboardASUS Pro WS X570-ACE
    ProcessorRyzen Pro 3700
    Memory (part number)64GB ECC (TE416G26D819VK-VKC)
    Graphics Card #1GTX 1080 Ti Hair Dryer Edition
    Sound CardBehringer U-phoria UMC202HD
    MonitorViewsonic Elite XG270QC
    Storage #1XPG SX8200 Pro Version 1 2TB
    CaseFractal Define S2
    Power SupplyRedundant Supermicro 1280W Power Supply (PWS-1K28P-SQ)
    Keyboard ASUS TUF Gaming K7
    Mouse Logitech G604
    Headset AKG HSC 271
    OS Windows 10 Pro
    Accessory #1 https://hackaday.io/project/177933-pc-140mm-air-filter
    Accessory #2 https://hackaday.io/project/177892-supermicro-to-atx-power-supply-adapter

    Join Date
    Mar 2021
    Reputation
    31
    Posts
    2

    Talking PC mods with a 3D printer

    Before I get to the mods, I need to say that this PC does have ASUS parts: Pro WS X570-ACE motherboard, TUF Gaming K7 keyboard.

    My PC mods are a lot different from everyone else's. There is no flash, no bling, and at the moment, no RGB. Instead, I'm going to show you how an engineer does it, or more precisely, how an engineer over-does it!

    PC Mod #1: The Air Filter
    The current trend is to use large radiators, slow moving 120/140 mm fans, and very minimal air filtration. Over time the PC will accumulate dust, hair, and nasty crud that never comes off fan blades. But with this mod, my PC will stay squeaky clean. I've built models for 70, 80, 92, and 120 mm fans. The whole filter consists of four printed parts, several bolts, one lawnmower air filter, and one fan. While this mod doesn't feature any RGB lighting, you have access to the OpenSCAD files on GitHub, so you could remix it to include RGB light strips behind the filter, shining through.



    Inside the case:
    Click image for larger version. 

Name:	IMG_4489_15.jpg 
Views:	27 
Size:	113.4 KB 
ID:	87976

    Outside the case (without front panel):
    Click image for larger version. 

Name:	IMG_4488_15.jpg 
Views:	27 
Size:	102.8 KB 
ID:	87977


    PC Mod #2: Redundant Power Supplies
    I designed and built this mod just to show that it could be done, but the result is so freaking awesome that I had to share. These are dual 1280 Watt, hot-swappable, 80 Plus Platinum power supplies. The Power Distribution Board features three GPU power cables, each with two 8-pin connectors. I think this server-grade setup meshes well with the ASUS workstation-grade motherboard. NOTE: Everywhere you see the color orange, that is this mod. It's huge!



    Backside:
    Click image for larger version. 

Name:	IMG_4460_15.jpg 
Views:	27 
Size:	121.3 KB 
ID:	87978

    Underside:
    Click image for larger version. 

Name:	IMG_4458_15.jpg 
Views:	27 
Size:	132.2 KB 
ID:	87979

    There is no reason why you can't build these mods, too. All the knowledge you need is right here.

  2. #2
    New ROGer Array
    Join Date
    Dec 2020
    Reputation
    10
    Posts
    31

    Your setup looks great however there is a reason why the current trend is to use minimal filtration and its because of airflow. While your system may work fine for a standard build, it unfortunately will not work for any type of overclocking, or systems that generate a lot of heat. And unfortunately with this case it appears your only using 2 intake fans and 1 exhaust fan??? .....this will not be adequate for this system.(placing filters directly over a fans intake reduces their efficiency drastically). I can guarantee it will run 20-30 degrees hotter than a case with good airflow and when under high loads it will thermal throttle. Most enthusiasts who buy cases for the good airflow will immediately remove any mesh or foam filters so they have the best airflow possible or do what I do now and just buy an open chassis case. It would have been a lot easier and simpler to just make you case a positive pressure case utilizing fans. Why do you need 2 x1280watt PSU's?
    Last edited by SmokeyKilla; 03-13-2021 at 03:49 PM.

  3. #3
    New ROGer Array AS185 PC Specs
    AS185 PC Specs
    Laptop (Model)Lenovo Y700-17ISK
    MotherboardZenith Extreme
    ProcessorAMD 1950X
    Memory (part number)8 x G Skill F4-3200C16D-32GTZKW @ 2666MHz
    Graphics Card #1Nvidia Titan RTX
    Sound CardIntegrated SupremeFX
    MonitorMSi G27C4
    Storage #16 x PNY 2TB XLR8 CS3030
    Storage #23 x 1TB Crucial MX500
    CPU CoolerThermaltake Water3.0 Ultimate
    CaseCorsair Obsidian 900D
    Power SupplyCooler Master MasterWatt Maker 1200W
    Keyboard Razer Ornata Chroma
    Mouse Razer Mambe TE / Logitech USB TrackMan Wheel
    Mouse Pad steelseries Cyberpunk 2077 edition
    Headset/Speakers Logitech Z-5300e
    OS Windows 10 Home x64
    Accessory #1 Asus Hyper M.2 X16 Card V2
    Accessory #2 Asus DIMM.2 card in slot
    Accessory #3 KingMod Corsair 900D Silencing Kit
    AS185's Avatar
    Join Date
    Feb 2020
    Reputation
    11
    Posts
    81

    I like the dual fans designed. They look solid but take up a lot of space.

  4. #4
    TeamROG Moderator Array xeromist PC Specs
    xeromist PC Specs
    Laptop (Model)Dell Inspiron 15 7567
    MotherboardMSI x470 Gaming Plus
    ProcessorAMD 2600X
    Memory (part number)16GB Crucial Ballistix Elite 3600
    Graphics Card #1ASUS GTX 1080 Strix
    MonitorBenQ BL3200PT
    Storage #1Intel 600p NVMe
    CPU CoolerWraith
    Casecustom Antec 900
    Power SupplyCorsair HX1000
    Keyboard Logitech Orion Spark
    Mouse Logitech MX500
    Headset Plantronics 777 with Oregon Aero upgrade
    xeromist's Avatar
    Join Date
    Jul 2010
    Reputation
    318
    Posts
    7,844

    Quote Originally Posted by SmokeyKilla View Post
    Why do you need 2 x1280watt PSU's?
    Servers use them for redundancy in case one fails so think of it like a single 1200w PSU that's just really reliable. Unfortunately because of the small dimensions they use little tiny fans which are very noisy at full load. It just depends on where you are going to put the machine as to whether that is an issue or not.
    * Support disease research with Folding@Home *

    < < < Click the drop-down above my avatar for my PC specs!

  5. #5
    New ROGer Array
    Join Date
    Dec 2020
    Reputation
    10
    Posts
    31

    I meant why run a 1200watt PSU if the system he is using is the one in his tag then approx 350watt is all that is required. So even a 500watt psu would be overkill.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •