Results 1 to 1 of 1
  1. #1
    ROG Enthusiast Array Alan PC Specs
    Alan PC Specs
    MotherboardASUS ROG Strix X570-E
    ProcessorAMD 5900X
    Memory (part number)32GB 3600Mhz CL14 (TDPPD416G3600HC14CDC01)
    Graphics Card #1Hunting since November but no luck in the UK yet for:
    Graphics Card #2ASUS ROG Strix 3090 OC
    Monitor8 connected as monitors: 4k OLED, HD touchscreen, raspberry pi screen, 3 tablets & phone
    Storage #12x 1TB Sabrent Rocket PCIe 4.0 NVME M.2 2280
    Storage #24TB Seagate IronWolf Pro HDD ST4000NE001
    CPU CoolerNZXT Kraken z93
    CaseAntec DA601
    Power SupplyCorsair HX1000i
    Keyboard Logitech G19
    Headset/Speakers 7.1 channels into 3 wearable haptic feedback devices + 7 subs, 11 mid range & 11 tweeters.
    OS Windows 10
    Network Router600 Mbs connection
    Accessory #1 Spaceship sim for Elite Dangerous.
    Accessory #2 HOTAS, haptic feedback & screens attached to chair
    Accessory #3 Pedals, headtracker & VR
    Alan's Avatar
    Join Date
    Jan 2012
    Reputation
    10
    Posts
    36

    ASUS ARGB headers / zones problem and solution?

    I've just built a PC using an X570-E (2x ARGB headers) into 3 ARGB hubs into 16 ARGB items.

    As everything showed ASUS Aura support, I stupidly thought that ASUS software would properly support them and allow control of the ARGB items. However, Armoury crate reads the 16 items as one single LED strip so I'm unable to set zones in the ASUS software.

    I can set a pattern across everything (currently set as Stary Night) but can't create any flowing patterns etc. I can adjust the amount of LEDs on both headers in Armoury crate but seeing as HUBs are into both Mobo headers and some ports are for ARGB fans, others ARGB LED strips, the numbers aren't one amount per Mobo header.

    What I'm now thinking - please correct me if I'm wrong - is with an ASUS Aura terminal (or something else?), that gives 4 ARGB channels apparently plus the one that's already in the Mobo and software that I mentioned?

    So in effect, I could set zones for back, top, middle and bottom on the terminal, then centre on the Mobo....?

    Any advice would be much appreciated!

    Thank you

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •