03-12-2021 08:15 AM - last edited on 03-05-2024 07:05 PM by ROGBot
03-17-2021 02:50 PM
03-18-2021 04:28 AM
03-18-2021 05:10 AM
Lotzi wrote:
Try this Bios Version from here
https://www.dropbox.com/s/t8l30zudba0amrk/ROG-MAXIMUS-XIII-HERO-ASUS-0610.rar?dl=0
03-18-2021 06:14 AM
03-24-2021 11:02 AM
Lotzi wrote:
Try this Bios Version from here
https://www.dropbox.com/s/t8l30zudba0amrk/ROG-MAXIMUS-XIII-HERO-ASUS-0610.rar?dl=0
03-25-2021 03:03 PM
03-26-2021 07:40 PM
Micas wrote:
An update on this:
I've tried the suggestions in this thread without success (success being able to run the memory in dual channel). I updated the bios to 0605 without first updating to 0610. I'm not sure the sequence of bios releases and the naming convention. If it is safe for me to try 0610 (assuming it's newer than 0605), I'll do that. 0605 has a lot of firmware updates.
I again tried 2 DIMMs in dual channel using A2 and B2 which failed with code 55 with the memory at 2133Mhz. It also doesn't work with the XMP profile.
I re-seated the CPU without effect. I did see that the bios identified a new CPU was installed, but that's probably due to removing the CPU. I inspected the CPU pins on the MB and they look fine. Seems pretty unlikely that the CPU isn't seated correctly.
With regard to the question of the memory itself, this is the description. I bought 2 identical kits. They worked fine in a Maximus X Hero. I tested each DIMM individually and they're fine.
G.SKILL TridentZ RGB Series 16GB (2 x 8GB) 288-Pin DDR4 4133MHz (PC4 33000) Desktop Memory Model F4-4133C19D-16GTZR
I'm hesitant to buy new memory from the QVL if the problem really isn't the memory.