Results 1 to 3 of 3
  1. #1
    New ROGer Array
    Join Date
    Jan 2019
    Reputation
    10
    Posts
    1

    Arrow Replacing thermal pad on M.2 SSD

    I'm concerned about how to safely remove the thermal pad when upgrading to a larger SSD. I don't see how to release the old M.2 SSD from the pad since the pad is adhered to the MB. Can't peal it off while the M.2 module is stuck to the MB by the thermal pad.

    Can someone help with this?
    Last edited by HDavidF2; 03-23-2021 at 05:12 AM.

  2. #2
    TeamROG Moderator Array xeromist PC Specs
    xeromist PC Specs
    Laptop (Model)Dell Inspiron 15 7567
    MotherboardMSI x470 Gaming Plus
    ProcessorAMD 2600X
    Memory (part number)16GB Crucial Ballistix Elite 3600
    Graphics Card #1ASUS GTX 1080 Strix
    MonitorBenQ BL3200PT
    Storage #1Intel 600p NVMe
    CPU CoolerWraith
    Casecustom Antec 900
    Power SupplyCorsair HX1000
    Keyboard Logitech Orion Spark
    Mouse Logitech MX500
    Headset Plantronics 777 with Oregon Aero upgrade
    xeromist's Avatar
    Join Date
    Jul 2010
    Reputation
    318
    Posts
    7,844

    Is the pad stuck to the drive or the board? A picture might help. Anyway, an adhesive pad should not be like a permanent glue. Removing it may cause it to be less sticky but it should not damage anything. Obviously if pulling on the pad causes significant flexing and it won't release then stop. Warming with a hair dryer might help in that case.
    * Support disease research with Folding@Home *

    < < < Click the drop-down above my avatar for my PC specs!

  3. #3
    New ROGer Array
    Join Date
    Mar 2021
    Reputation
    10
    Posts
    9

    nvme m.2 ssd without thermal no issues I don't know if thermal also a need for m.2 ssd

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •