Results 1 to 3 of 3
  1. #1
    ROG Member Array
    Join Date
    Mar 2015
    Reputation
    10
    Posts
    19

    Bios Flash Will not work

    Hello forum, I am trying to flash my maximus XIII

    with Ez flash in the bios . I down loaded the correct file, Ran the file renamer, as Admin.
    Put the cap file in the root of the flash drive restarted pc went into ezflash
    It tells me this is not a correct file to use?

    Never, ever had any issues what so ever flashing any bios, the ez way
    or the old school method ??
    Please advise
    Dazed and confused

  2. #2
    ROG Guru: Green Belt Array
    Join Date
    Feb 2019
    Reputation
    129
    Posts
    712

    Your board has the BIOS flashback button built in where you can flash the bios even without a CPU, RAM or GPU installed if you want.

    Try this, right from your manual. just make sure the USB is in the slot marked BIOS.
    Make sure the USB is formatted fat32 and nothing else is on it but the BIOS file named M13H.CAP
    Light will start to flash and it usually takes a minute or two. If it flashes then stops immediately something isnt right like wrong name or USB in wrong port.
    Also best to clear CMOS before beginning.

    Click image for larger version. 

Name:	try this.png 
Views:	4 
Size:	107.3 KB 
ID:	88388
    Last edited by BigJohnny; 04-18-2021 at 04:30 AM.

  3. #3
    ROG Member Array
    Join Date
    Mar 2015
    Reputation
    10
    Posts
    19

    Bios Flash

    Thank you BigJohnny
    that worked I had the wrong bios file
    you are a gentleman and a scholar

    Before the flash my memory bandwidth was 32.5 Gb/sec
    now it is 46.4 Gb/sec.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •