I've got a pair of Intel 520's and a pair of OCZ Solid 3's in RAID0 and haven't had any issues with either. Intel's are on the SATAIII ports and OCZ's are on the SATAII ports. Updated the firmware on the OCZ's to the 2.15's and the Intels are on what they were when I bought them (400i) is what RST is saying. I did hear a lot of bad things about the OCZ vertex 3's as well but most I read about were on the x59 chipsets and or trying to use them on Marvell ports. I tried all my ssd's on the Marvell's and they would drop pretty much like clockwork during intense or prolonged use. The OCZ's dropped from time to time when comp was idle but after flashing the firmware that was resolved. Easiest way to determine what to get is read reviews and check forums of the brand your looking at since thats usually where the ones who run into problems post first. Good luck with your decision :cool:
AMD 2700X, Asus ROG Strix X470-F, G.Skill Trident Z Neo 3600 (16gbx2), XFX RX 580, NZXT Kraken X62, Corsair 750D, SeaSonic 860W, OCZ RD400, Samsung 950 Pro 256Gb, Intel 520 120Gb SSD