BUMP BUMP BUMP
Finally after days i found the solution how to have armoury crate fully working on the rog crosshair formula motherboard.
first go into your uefi bios and enable Tool->ASUS Armoury Crate->Download & Install ARMOURY CRATE app->Enabled
also make sure AURA is ON (F4) in your bios.
and check
Advanced->Onboard Devices Configuration->RGB LED lighting->When system is in working state->All On
Advanced->Onboard Devices Configuration->RGB LED lighting->When system is in sleep, hibernate or soft off states->All On
then F10 save and exit.
all i had to do was to completly reinstall windows 10.
there was no other way around, Armoury Crate Uninstall Tool v1.1.4.0 wasn't uninstalling anything.
and armoury crate is uninstallable. there is always something left on the system.
after windows 10 installation and after the first windows start do not install any drivers or windows updates!just let it sit there.
this was the most important step. i repeat after windows 10 has installed itself from your media creation usb stick, do not install any drivers or windows updates.
now in the right lower corner a small window will pop up and ask if you want to install armoury crate app.
confirm with yes.
if no windows pops up, then install manually ArmouryCrateInstaller v3.0.11.0.exe (
https://rog.asus.com/de/armoury-crate/) with admin rights .
wait for the installation to complete.
it can take very long. 10> minutes and more.
at 55% it will look like its stuck, then your rgb lights will start to flicker and change colors.
then it will complete 100% installation.
now reboot.
and everything should work.
p.s. it even works on dual boot with two windows 10 installations and on raid 0 nmve config.
i guess the problem is some other driver (usb?) either from windows update or your mobo driver folder was blocking the successfull armoury crate installation.
one more thing. connect the aura rog terminal only directly with a usb cable to the rear usb port of your motherboard.
do not use a usb-hub.
proof
p.s. @ASUS pls do not make aura rog terminal eol only if you want to make a aura rog terminal v2. believe me many customers need a device like the terminal to control their led strips at example behind the monitor.