Results 1 to 3 of 3
  1. #1
    ROG Member Array
    Join Date
    May 2021

    ASUS Z590 E Gaming WiFi + i7 10700K crazy Vcore (BIOS 0605)

    I use a Z590 E Gaming board paired with a i7 10700K CPU.
    Loading BIOS defaults "F5" but changing ME to "Enforce all Limits" gives crazy high Vcore Predictions of about 1.5x. Checking with HWInfo just bootet into Windows shows also about 1.48 on some ocasions even 1.51 max Vcores when the CPU Boosts up to 5.1GHz.

    AFAIK these are way to high for a non OC system. I literally had to manualy set it to 1.4 in the BIOS to get the Vcores down to a more reasonable level. Limiting the voltage to 1.35 even got me blue screens booting into Windows.

    Any thoughts?

  2. #2
    ROG Member Array pdixon0 PC Specs
    pdixon0 PC Specs
    ProcessorIntel Core i7-11700K
    Memory (part number)G.Skill Trident Z RGB 3733MHz 32GB (F4-3733C17D-32GTZR)
    Graphics Card #1ASUS ROG STRIX 3070 Ti O8G Gaming OC
    Monitor3x HP LA2405x
    Storage #1WD SN850 500GB
    Storage #2AData SX8200 Pro 2TB (early version)
    CPU CoolerNoctua NH-D15 Chromax.Black
    CaseAntec P120 Crystal
    Power SupplyCorsair RM750i
    Keyboard Steelseries Apex 3
    Mouse Steelseries Sensei 10
    Headset Steelseries Arctis 1
    Headset/Speakers Creative 8200
    OS Win 10 Pro x64
    Network RouterSky SR203 and BT Hub6 used as switch
    Accessory #1 6 x Noctua S12A Chromax.Black case fans
    Accessory #2 2nd Noctua NH-D15 fan used as case exhaust just behind the 2nd tower

    Join Date
    Mar 2021

    I had a similar experience, there a post on here about it too. I couldn't even get my 10700K to POST with the same settings I'd used on my previous Z490 PRIME-A...

  3. #3
    ROG Member Array
    Join Date
    May 2020

    I had a similar issue. I was messing around with Intel XTU overclocking my 10700K on the desktop via the application. In BIOS my settings were all set to auto except for Load Line Calibration set to level 4 and AC/DC Load Line set to 0.40 mOhm.

    My issue was somewhat similar, I was experiencing high volts up to 1.45 volts when I should have been seeing 1.265 volts. And it turns out that because I messed with the per-core overclock multipliers in the Intel XTU application, it was causing weird behavior for my CPU.

    So in order to reverse whatever I did with Intel XTU, I just uninstalled it, restarted my computer, and then reinstalled the XTU (I use Intel XTU for the CPU monitoring). Now my CPU behaves as expected.

    Do you have any similar apps that allow desktop overclocking?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts