Hi all,
Long story short: Is the lowest stable voltage of RAM better, or it could affect performance?
Hi all,
I would like to ask for a help with RAMs running in DOCP profile. When I switched into DOCP I observed instability and screen flickering. In events monitor in Windows 10 there were couple of entries, that display driver stopped responding and it was recovered. I suspected the GPU, but when I switched off the DOCP, it all ran smooth. So I thought that voltage of DRAM could be the problem. I started raising voltage of RAM slightly, but screen flickering appeared more often. After I find out, that even overvoltage can cause instability as well, I decided to lower the voltage. And voila, PC started to run smoothly. Factory voltage of my RAM is 1.2V while in DOCP they supposed to run in 1,35V But I found out, that it is stable in 1,325V. But then I was curious how low I could go with voltage. I set back 1.2V and PC don't even went into POST. Some little tuning and I found out that on 1,250 PC run smooth also. So my question is. Should I leave DRAM voltage as low as possible, or lower voltage could affect performace. Which number between 1,250 and 1,325V should I choose?
Thank you all
My PC spec
Ryzen 5 - 5600X
Asus B550-F
16GB G.Skill Trident Z RGB 3600Mhz