Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

GT-AX11000 with 3.0.0.4.386_43129 breaks piHole integration.

GreenMotion
Level 7

‎05-24-2021 07:03 AM - last edited on ‎03-05-2024 06:57 PM by Community Admin

After upgrading my GT-AX11000 to the latest firmware (3.0.0.4.386_43129), my piHole integration is partially broke.

To explain my setup:

I have DHCP configured to point all my clients to my piHole server, however, since the router continues to give out ITS IP address as secondary DNS, some of my clients occasionally bypass the piHole. To resolve this issue, I had set the router's WAN DNS Settings (DNS Server 1 and DNS Server 2) to point to my piHole as well. (my piHole uses 1.1.1.1 for DNS resolution)

This worked perfectly until 3.0.0.4.386_43129. After this upgrade, my router says it's disconnected from the internet. All my clients can ping IP addresses, but no DNS resolution. Setting DNS Server 1 and DNS Server 2 to anything other than the piHole (i.e. 1.1.1.1 and 1.0.0.1) resolves the issue, but once again, this in turn allows the occasional client to bypass my piHole.
0 Kudos
3,061 Views
9 REPLIES 9

j_christy_gt
Level 7

‎05-27-2021 12:38 PM

I had the same issue with that firmware update. I had to downgrade back to 3.0.0.4.386.41700 to get the network up again. I tried just going back to 9.0.0.4.386.41994 (for the security patches), but it also would not work with the piHoles.

I have 2 piHoles on my network (i had an unused pi3b laying around), and both have a set of three different DNS server addresses.

I have submitted requests through the firewall repot tool to have those DNS address entries added to the DHCP server settings, but no changes have happened yet.
0 Kudos

dzuser
Level 7

‎06-02-2021 04:24 AM

GreenMotion wrote:
After upgrading my GT-AX11000 to the latest firmware (3.0.0.4.386_43129), my piHole integration is partially broke.

To explain my setup:

I have DHCP configured to point all my clients to my piHole server, however, since the router continues to give out ITS IP address as secondary DNS, some of my clients occasionally bypass the piHole. To resolve this issue, I had set the router's WAN DNS Settings (DNS Server 1 and DNS Server 2) to point to my piHole as well. (my piHole uses 1.1.1.1 for DNS resolution)

This worked perfectly until 3.0.0.4.386_43129. After this upgrade, my router says it's disconnected from the internet. All my clients can ping IP addresses, but no DNS resolution. Setting DNS Server 1 and DNS Server 2 to anything other than the piHole (i.e. 1.1.1.1 and 1.0.0.1) resolves the issue, but once again, this in turn allows the occasional client to bypass my piHole.


Having exactly the same issue with my GT-AX11000 (using the latest firmware (3.0.0.4.386_43129)) and a piHole. Hopefully a fix / update arrives soon!!
0 Kudos

ShannyMan
Level 7
In response to dzuser

‎06-05-2021 12:42 PM

dzuser wrote:
Having exactly the same issue with my GT-AX11000 (using the latest firmware (3.0.0.4.386_43129)) and a piHole. Hopefully a fix / update arrives soon!!


I'm also experiencing the same thing. Took me a couple of hours to figure out that's what the issue was. I thought the upgrade completely broke the internet connectivity, but it was just the DNS/pihole usage which was broken.
0 Kudos

wilsondenq
Level 10
In response to ShannyMan

‎06-07-2021 11:44 PM

Hi there,

Please try this new beta of internal build to see if it solve your pihole issue.
https://www.asuswebstorage.com/navigate/a/#/s/7FFB6BF65A4646E09D8AAE5E6BCFCEE1Y

Thanks.

j_christy_gt
Level 7
In response to wilsondenq

‎06-08-2021 06:36 AM

Applied the firmware this morning and it did not break pihole. So far, so good. Thanks!

wilsondenq wrote:
Hi there,

Please try this new beta of internal build to see if it solve your pihole issue.
https://www.asuswebstorage.com/navigate/a/#/s/7FFB6BF65A4646E09D8AAE5E6BCFCEE1Y

Thanks.
0 Kudos

ShannyMan
Level 7
In response to wilsondenq

‎06-08-2021 06:21 PM

wilsondenq wrote:
Hi there,

Please try this new beta of internal build to see if it solve your pihole issue.
https://www.asuswebstorage.com/navigate/a/#/s/7FFB6BF65A4646E09D8AAE5E6BCFCEE1Y

Thanks.


So far it looks good for me too. Thank you for the quick fix!
0 Kudos

litejk01
Level 7
In response to wilsondenq

‎06-15-2021 09:08 PM

wilsondenq wrote:
Hi there,

Please try this new beta of internal build to see if it solve your pihole issue.
https://www.asuswebstorage.com/navigate/a/#/s/7FFB6BF65A4646E09D8AAE5E6BCFCEE1Y

Thanks.


Had the same issue. so far so good with this Beta firmware.
0 Kudos

wilsondenq
Level 10
In response to litejk01

‎06-17-2021 12:08 AM

Thanks guys will release formal soon
0 Kudos

litejk01
Level 7
In response to litejk01

‎07-19-2021 05:28 AM

litejk01 wrote:
Had the same issue. so far so good with this Beta firmware.


And now tested the official : https://rog.asus.com/us/networking/rog-rapture-gt-ax11000-model/helpdesk_bios Version 3.0.0.4.386.44266 and it works nice with Pi-Hole 🙂
0 Kudos