AGESA 1.2.0.3 Patch A for 500 Series ROG ASUS Motherboards

[SirMaxxi]

Before any UEFI update you can save your settings to a text file.
After updating you can use that text file to enter your settings, but you may have to change some values.

Cheers.

I'm so doing that before I update on the future thank you �

[Daylight_Invader]

Please please please fix the DRAM voltages for this 3601 release. I cannot get the board to actually set the correct target DRAM voltage with this new release which causes my board to not post.

You can literally write any number in the voltage settings, but it won't go above around 1.22V.

[Escorpiom]

Please please please fix the DRAM voltages for this 3601 release. I cannot get the board to actually set the correct target DRAM voltage with this new release which causes my board to not post.

You can literally write any number in the voltage settings, but it won't go above around 1.22V.

Sorry, but that's just not true.
I've set my ram to 1.33v and it checks out in HWinfo.
Make sure you don't load previous saved uefi profiles as they are not compatible.

Edit: I just read your post in another thread. It seems you are referring to "auto" ram voltage. Can't comment on that, I did set it manually.

Cheers.

[Daylight_Invader]

Sorry, but that's just not true.
I've set my ram to 1.33v and it checks out in HWinfo.
Make sure you don't load previous saved uefi profiles as they are not compatible.

Edit: I just read your post in another thread. It seems you are referring to "auto" ram voltage. Can't comment on that, I did set it manually.

Cheers.

When you use auto, it ‘manually’ sets the target voltage in the voltage field, but if you look at current value to the left of the field, it shows the low value I refer to. To be clear, I’ve only noticed this bug with this new version. It’s not an issue with previous BIOS builds.

If I then save and restart, board fails to post.Â*

[garito22]

I don't know where to post it, but if I activate the ErP (S4 + S5) option to turn off all USB and lights, when I turn on the PC it can't boot and I need to reboot until it decides to boot. What should I do ?

CPU: RYZEN 5 5600X
VIDEO: ZOTAC RTX 3080 Trinity OC
MOTHER: ASUS ROG STRIX B550-E GAMING
RAM: F4-3200C16D-32GTZR
NVME/SSD M.2: WDS100T3XHC-00SJG0 / GP-AG4500G
CPU COOLER: NOCTUA NH-U12S-Chromax Black
FUENTE: NZXT C850
COOLERS: DEEPCOOL ARGB x6
MONITOR: TUF GAMING VG27A (2560px1440p)

[JeffLo]

3601 is buggy vs 3501

[Tones]

Having big issues with b550xe crashing then booting into bios

Takes up to 20 reboots before it will boot up. Seems to have got worse from last BIOS update

[splash90]

Installed 4002 BIOS for X570-F motherboard, no problems so far.

[dgasusdarkhero]

this BIOS works great for my CH8 Dark Hero.

[lindsay_]

Installed on a Strix x570-E gaming with no issues so far (bios 4002).