cancel
Showing results for 
Search instead for 
Did you mean: 

Wake on LAN not working on driver higher than 1.0.1.4 on l255-V

kormyr
Level 7
Basically what the title mentions. On a B550-F doesn't work and neither on a Z590 board. Installing driver 1.0.2.8 offered by armory crate breaks the WOL functionality. Reverting to 1.0.1.4 makes it work back inmmediately. This is on a onboard lan intel l225-V.
5,290 Views
14 REPLIES 14

kormyr
Level 7
Bumping thread. Any moderator could take a look? I reported this to support but not too much luck.

I have the same issue on the Z590-F

Alexx69rus
Level 7
Same on Z590-E

Found driver 1.0.2.13 https://www.driveridentifier.com/scan/intelr-ethernet-controller-3-i225-v-driver/driver-detail/A1093.... Looks like it solved problem for me. Successfully woke up the system five times in a row at the moment.

Alexx69rus
Level 7
Unfortunately, this did not help. With 1.0.2.13 or 1.0.2.14 WHQL the system wakes up several times, and then stops until you turn off the power.

Alexx69rus wrote:
Unfortunately, this did not help. With 1.0.2.13 or 1.0.2.14 WHQL the system wakes up several times, and then stops until you turn off the power.


1.0.2.14 solves it IF you disable fast startup in windows. Not ideal, because 1.0.1.4 works with fast startup but this is as far as I got.

Blake1
Level 10
Dear all,
Please refer to below link
https://rog.asus.com/support/FAQ/1045950

May you help to provide below information so I can consult more about it?
1. complete model name of the motherboard and current BIOS version
2.current ethernet controller driver version
3. CPU spec and Windows version

Thank you very much.

Blake@ROG wrote:
Dear all,
Please refer to below link
https://rog.asus.com/support/FAQ/1045950

May you help to provide below information so I can consult more about it?
1. complete model name of the motherboard and current BIOS version
2.current ethernet controller driver version
3. CPU spec and Windows version

Thank you very much.


1. ROG STRIX Z590-E GAMING WIFI, BIOS 1007
2. ethernet controller driver - 1.0.2.8 (I tried all versions, including 1.0.1.5 from FAQ)
3. i9-11900k, Windows 10 Enterprise 21H1 (10.0.19043.1165), all updates installed


I installed TP-link TG-3468 network card, WOL works stably with it in 100% of cases.

Created ticket in support:
ASUS Service No=E21070059795-0011

Alexx69rus wrote:
1. ROG STRIX Z590-E GAMING WIFI, BIOS 1007
2. ethernet controller driver - 1.0.2.8 (I tried all versions, including 1.0.1.5 from FAQ)
3. i9-11900k, Windows 10 Enterprise 21H1 (10.0.19043.1165), all updates installed


I installed TP-link TG-3468 network card, WOL works stably with it in 100% of cases.

Created ticket in support:
ASUS Service No=E21070059795-0011


Am Facing the same Problem here:
1. ROG STRIX Z590-E GAMING WIFI, BIOS 1007.
2. ethernet controller driver - 1.0.2.8.
3. i7-11700k, Windows 10 Pro 21H1 (Build 19043.1288), all updates installed.

Tried with Fast Startup Enabled and Disabled didn't work, till i found that Post.

guys if you found a solution can you please post it here it may help me and other
Thank you in Advance