06-15-2021 03:22 AM
06-15-2021 08:23 PM
06-16-2021 03:57 PM
06-17-2021 04:41 AM
06-20-2021 04:01 AM
06-25-2021 03:06 PM
Swallowtail23 wrote:
Did some more testing.
With a HDMI cable the 3080ti activates a a monitor-supported VGA mode going through boot and I see BIOS screens; it eventually loads into Windows but is limited to 5120x1440 @ 60Hz. The motherboard does not see any VGA error, so no LED lit.
With a DisplayPort cable the 3080ti does NOT activate a monitor-supported VGA mode going through boot and I do not see BIOS screens; it eventually drops into Windows at monitor-maximum 5120x1440 @ 120Hz. The motherboard sees a VGA error, so the white VGA LED stays lit.
So this appears to be a 3080 ti output mode over DP not matching the Samsung through BIOS / boot. Other cards work fine in the same configuration (e.g. 2060 Super).
06-27-2021 02:16 AM
milesk182 wrote:
Similar issue on my z490-e with a evga rtx 3080ti ftw ultra. i cant see the bios post screen with any DP port or cable i try but hdmi i can see the bios fine. DP works when it gets to windows loaded but nothing before that. I just upgraded from the rtx 3080 ft ultra and had no issues with that card at all?
I have updated to the latest 6/24 bios update and updated teh video card with the latest vbios provided by the evga precision software with no luck still. not sure what to do? i already did the basics of bios defaults and clean install of nvidia drivers as well. when i called evga they said theyre getting reports or this from all sorts of manufactuer 3080ti cards not just theirs and to contact the motherboard manufacturer.
06-27-2021 10:57 PM
06-28-2021 09:25 AM
06-28-2021 09:26 AM