Ryujin 360 Noctua my experience

[Galaxis]

After several tests on a ROGMXIIF motherboard
I tested the different connections of the fans
Currently:
ROG AIO on W + Pump or AIO Pump
(no difference for me)
Fans: ROG AIO
Fan 1 CPU on CM
Fan 2 CPU Opt on CM
Fan 3 On ROG AIO.
in fact I only have a fan connected to the RYUJIN next to the pipes.
Fans Helios: Replaced by Be Quiet! BL067 x 4,
3 on the front and 1 on the back, arranged as follows:
Top fan Cha_Fan 1,
fan of the Cha_Fan 3 and
Cha_Fan 2 bottom fan,
Rear Fan H_Amp
for info here is my temperature data at rest (idle):
CPU 33 ° - 306 Rpm - CPU_Opt 312 Rpm Source CPU
Motherboard 30 ° - Chassis Fan 3 388 Rpm Source Chipset GPU
CPU Package 34 ° - Chassis Fan 2 312 Rpm Source MB Chipset GPU
Chipset 49 ° - Chassis Fan 1 221 Rpm Source MB and VRM
VRM 41 ° - High Amp Pump 296 Rpm Source VRM
W_Pump 718 Rpm Source CPU, manual setting in Aisuite III 30.0.0.60
GPU 26 °.
Armory Crate not installed too many unknowns in the software for me still too many conflicts depending on the different possible configurations.
Bios Default no change
Aisuite AI just for Fan Expert 4
Then modifications of personal fan controls.
My case being open, I do not have a perfect diffusion of air
I have 0.35 (° c / w)
Curve settings: generally by default
Chassis Fan 1-3: 15/40 - 54/60 - 100/75
High Amp 30/40 - 57/60 - 100/75
W_Pump 10/40 - 60/60 - 100/75
ROG AIO 17/40 - 49/60 - 100/75
ROG AIO Fan1 17/40 - 49/60 - 100/75
ROG AIO Fan1 17/40 - 49/60 - 100/75 Second fan on the ROG AIO ???????
This is for informational purposes
Of course my case is completely silent
some Be quiet! running at - 400 RMP (mdr)
Unfortunately in all this I just noticed that one of my ROG AIO noctua fan is Hs
but does not change anything I configured.
If that can help
I would be happy to exchange infos with you.
Lag