Results 1 to 2 of 2
-
07-06-2021 05:05 PM #1
- Join Date
- Jul 2020
- Reputation
- 10
- Posts
- 1
AX11000 2.5G Port getting disconnected
Hi! So i have 2 AX11000 in AiMesh mode, i have the node connected by ethernet backhaul to the main one using the 2.5G port, because i have dual wan (2 ISP´s) in balance mode (1000 mbps + 600 mbps) so triying to get the most out of it via wireless, but the node gets disconnections a couple times a week and i need to reboot the system (main router) from app or web GUI to get the node running again... Rn using a regular 1Gbps port i havn't had any disconnection, so im sure the problem is whe using 2.5G port backhaul. Any ideas how to fix this? What to check? I did factory reset both routers to see if that helped but no luck, also i don't have any special config besides the dual wan. It's like the 2.5G port is not stable enough to keep working... I saw another thread in another forum about similar problems with the 2.5G port...
-
08-25-2021 08:59 AM #2
- Join Date
- Feb 2019
- Reputation
- 15
- Posts
- 920
Hi there,
May you help to follow below FAQ to set up dual WAN again?
https://www.asus.com/support/FAQ/1011719/
Thank you.