Results 1 to 2 of 2
  1. #1
    New ROGer Array
    Join Date
    Jul 2020
    Reputation
    10
    Posts
    1

    Exclamation AX11000 2.5G Port getting disconnected

    Hi! So i have 2 AX11000 in AiMesh mode, i have the node connected by ethernet backhaul to the main one using the 2.5G port, because i have dual wan (2 ISP´s) in balance mode (1000 mbps + 600 mbps) so triying to get the most out of it via wireless, but the node gets disconnections a couple times a week and i need to reboot the system (main router) from app or web GUI to get the node running again... Rn using a regular 1Gbps port i havn't had any disconnection, so im sure the problem is whe using 2.5G port backhaul. Any ideas how to fix this? What to check? I did factory reset both routers to see if that helped but no luck, also i don't have any special config besides the dual wan. It's like the 2.5G port is not stable enough to keep working... I saw another thread in another forum about similar problems with the 2.5G port...

  2. #2
    Moderator Array
    Join Date
    Feb 2019
    Reputation
    15
    Posts
    868

    Hi there,
    May you help to follow below FAQ to set up dual WAN again?
    https://www.asus.com/support/FAQ/1011719/
    Thank you.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •