CMK32GX4M2D3600C18 not higher than 3000

[caheyne]

Hopefully, somebody can help me.

I do have an Asus Prime Z 490-A motherboard with a 10700KF and two CMK32GX4M2D3600C18 and latest bios 2201.
I can't get the speed higher than 3000 while it's 3600 memory.
settings 18-22-22-42 1.35V
I have to set manually speed to 3000, if on automatic or if I put it myself higher than 3000, system goes in POST or blue screen.

What am I doing wrong?

[Silent_Scone@ROG]

Hello,

Have you tried adjusting the VCCSA voltage?

Try values between 1.2 - 1.35v.

[caheyne]

Hello,

Have you tried adjusting the VCCSA voltage?

Try values between 1.2 - 1.35v.

I will try today, keep you posted, thanks!

[fed_olivera]

Why is a lot of people having troubles to reach more than 3000 mhz on rams? I'm also in that boat, cannot get past 3000 with a 3600 kit without troubles, have a z490e board. Is this a known issue?

[bscool]

Something to check if you are in the correct slots. a2 and b2 or check the manual. I know it shouldn't need to be said but I have seen it happen.

[caheyne]

I will try today, keep you posted, thanks!

1.25 and 3100mhz, that's the highest I can get! Strange.

[caheyne]

1.25 and 3100mhz, that's the highest I can get! Strange.

SOLVED
My bad, thought had the right banks, checked again, everything okay now! XMP I or XMP II, all works!

Thanks guys!

[caheyne]

Something to check if you are in the correct slots. a2 and b2 or check the manual. I know it shouldn't need to be said but I have seen it happen.

Thanks!