Results 331 to 340 of 632
Thread: Asus dark hero startup issue ?
-
12-25-2021 08:23 AM #331
- Join Date
- Dec 2021
- Reputation
- 10
- Posts
- 13
Yeah, thing with LED as indication also works.
I also trying DOCP setting suggested here right now. Will see how it goes.
-
12-25-2021 08:30 AM #332
-
12-25-2021 03:30 PM #333
- Join Date
- Dec 2021
- Reputation
- 10
- Posts
- 13
-
12-25-2021 04:21 PM #334
- Join Date
- Dec 2021
- Reputation
- 10
- Posts
- 1
Hi together,
i have this MB nearly a month now. Had the same problem you guys describe. After the newest Bios update (3904) i had no problems for nearly 7 days. But starting 3 days ago it resurfaced. i have it daily now...
i also can confirm: you can see if the mainboard has a bad sleepstate if the rgb lights on the mainboard are not working anymore (if activated in bios).
-
12-25-2021 04:41 PM #335
-
12-25-2021 05:21 PM #336
- Join Date
- Dec 2021
- Reputation
- 10
- Posts
- 22
Other than this issue, the board is functioning well and everything else works great. This is just a super annoyance to have on an expensive board. My tower is on my desk and my psu switch is super easy to reach when my shutdown and subsequent power ups fail. Can imagine for some people where they would have to crawl on floor to reach their psu switch would get even more annoyed then me. lol Hey ASUS this isn't a rare occurrence and is a plague with these series of boards, give us details please!
-
12-26-2021 09:18 AM #337
- Join Date
- Dec 2021
- Reputation
- 10
- Posts
- 13
No luck with DOCP settings to fix startup issue.
-
12-26-2021 01:17 PM #338
-
12-26-2021 02:31 PM #339
- Join Date
- Nov 2021
- Reputation
- 10
- Posts
- 2
bios Thermal check logic error?
When I shut down pc after gameing or editing videos, this start up issue happens 100%.
So I just checked below.
Case1:Start up pc -> Logon to windows -> Just shutdown ->[result] Start up issue is not happened.
Case2:Start up pc -> Run 3D mark ->After the 3D mark finished quick shut down ->[result] Start up issue is happened. 5/5
Case3:Start up pc -> Run 3D mark -> after the 3D mark finished 5min cool down time then shut down ->[result] Start up issue is not happened.
I guess
just before shutdown -> mb BIOS hold a high temperature on some parts and just keep holing while pc is off. *
then after the shutdown, when you try to boot pc, the bios check the held temp.
PC fans are not running and the held temp is high.
So it is not starting up?
Could someone confirm this with your pc?
My PC spec
Ryzen7 5800X
CORSAIR DDR4-3600MHz 16GBx4
Asus Strix-LC-3080Ti-O12G-gaming
And I'm using Hwinfo64 pro, every sensors show under 80 degree temp when Im playing game and editing vid.
So it most be ok.*Last edited by pokotaan; 12-27-2021 at 07:35 AM.
-
12-26-2021 04:56 PM #340
- Join Date
- Jul 2021
- Reputation
- 10
- Posts
- 37
Hello guys,
I've made a full clean install and no more booting issue. Here what I did :
- clean CMOS
- reinstall bios 3904 via usb
- clean all hard disk from bios with asus secure erase (important step)
- install windows by setting hard disk to GPT
- set the bios to nvidia rezisable mode
- install all the drivers
- VBIOS the graphic card (it's was the first time i did it, maybe this is what fixed the problem)
- Resizable bar is now on
- I've tested the turn on/off 20 times this morning and it's seems ok.
Hope this will help ,Last edited by Hardstyle; 12-27-2021 at 08:40 AM.