Hi,
I bought an Asus RoG Claymore 2 last week, noticed the number 3 key didn't work on the keypad, but later found out the number was was constantly being spammed.
I tried to fathom why it didn't work so restarted PC, thought maybe the 3 on my Naga was being pressed and stopping it etc so eventually restarted the PC again this is when I tried to google Asus support it came out as "A3sus". This got me thinking as I didn't type number 3. So restated PC once again, tried to use google, didnt type anything only to get "3" spammed. I tried to press 3 to stop it (had similar issues in games were character would continue to walk forward from a W press when I released and would press it again to reset the input) but this didnt stop it spamming "3", I press 123 on the numpad and this gave me the input of 12 and 3 stopped spamming. This is when number 3 didnt work at all. Here is what I tried:
- Taking the modular numpad off and installing it again causes the numpad to spam "3".
- Using the modular keypad on the opposite side resulted in same error
- All drivers were up to date and also firmware
- Pressing any other key resulted in the 3 key stopping it spamming the input on screen
- The FN key didnt work with the numpad attached, FN worked without the numpad installed
- Tested this theory by holding H down, letting it spam in notepad and stopping it by pressing G, as I kept the H down I tried to use the FN key which didn't work.
- This acted like my number 3 numpad issue meaning the numpad was constantly sending a signal for 3
I tried the forums, 1 post about the volume key not working another about 2, 5,8 not working but worked the next day.
I contacted Asus support, they responded very fast suggesting it might be a mechanical issue and to return it to place of purchase.
I returned the keyboard for a replacement, now received a new keyboard which the same exact issue but number 5 on the keypad.
I have tried the keyboard without armory crate, updated armory crate and even used a friends PC which has no gaming software installed and the issue persisted.
I have determined this issue is related to either the keyboard receiving a signal when in full keyboard setup or the numpad sending a bad signal or just that specific switch has been through poor quality control and constantly activating.
Has anyone else come across an issue like this? I really like the Claymore 2 and honestly don't think I can get my hopes up that the 3rd one won't have an issue.
Edit- UK keyboard layout if that makes any difference