Results 1 to 7 of 7
  1. #1
    ROG Member Array
    Join Date
    Oct 2021
    Reputation
    22
    Posts
    8

    How to install NVME SSD with own heatsink on an Apex XIII mainboard?

    Hello!

    I have the follow problem:
    I want to install an new NVME SSD (Corsair Force Series MP600 Pro XT) with and special integrated heatsink. So I'm able to remove the original heatsink from the M.2_1 slot of my Apex XIII mainboard but it seems to be a special screw holder for the Asus heatsink and this seems to be not compatible when you want to use an SSD without Asus original motherboard heatsink.

    Any Ideas?

  2. #2
    TeamROG Moderator Array xeromist PC Specs
    xeromist PC Specs
    Laptop (Model)Intel NUC laptop LAPQC71D
    MotherboardROG Crosshair VIII Dark Hero
    ProcessorAMD 5800X
    Memory (part number)32GB G.Skill Ripjaws V 3600
    Graphics Card #1ROG Strix RTX3090Ti
    Sound CardSound Blaster Z
    MonitorAORUS FV43U
    Storage #1Samsung 970 Pro 512GB
    CPU CoolerCustom loop
    CaseBeQuiet Dark Base Pro 900 V2
    Power SupplyCorsair HX1000
    Keyboard ROG Strix Flare II Animate
    Mouse ROG Chakram X
    Headset Steelseries Arctis Pro Wireless
    Mouse Pad ROG Scabbard
    Headset/Speakers Logitech z906 5.1
    Network RouterpfSense/OPNsense
    xeromist's Avatar
    Join Date
    Jul 2010
    Reputation
    436
    Posts
    8,540

    There is usually a standoff that can be unscrewed from the motherboard and moved to different holes to accommodate different length SSDs. If you cannot use what is already installed on the motherboard check the accessories to see if what you need is there.
    * Support disease research with Folding@Home *

    < < < Click the drop-down above my avatar for my PC specs!

  3. #3
    ROG Member Array
    Join Date
    Oct 2021
    Reputation
    22
    Posts
    8

    Not in my case. The only screw which is working, is the screw of the original heatsink. But this screw is to long.

  4. #4
    ROG Guru: Green Belt Array geneo PC Specs
    geneo PC Specs
    Laptop (Model)13" Macbook Pro M1
    MotherboardROG Maximus XIII Hero (WiFi)
    Processori9-10900k 5.2 GHz AVX0 all core, 1.28v
    Memory (part number)32 GB G.Skill TridentZ RGB 4266 @ CL18
    Graphics Card #1Asus ROG Strix 2070 Super A8G
    Sound CardOn-board
    MonitorEIZO Coloredge CG2730 and Viewsonic QHD displays
    Storage #1WDC SN850 1TB, Samsung 980 1TB
    Storage #21TB 850 x 1 TB 860 EVO RAID0, 6 TB WDC Black, 6TB IronWolf Pro
    CPU CoolerEK-AIO 360 D-RGB w/Phanteks T30 -120 fans, 1 Noctua Chromax 140 case fan
    CaseFractal Design Meshify 2 dark tint
    Power Supply750W Seasonic Prime Ultra Titanium Plus
    Keyboard Glorious GMMK TKL
    Mouse Logitech G305
    Headset Bose QC15
    Headset/Speakers Vanatoo T1, Klipsch R-12SWi Sub
    OS Windows 11 Pro X64, 22H2
    Network RouterLinksys EA7300
    Accessory #1 Logitech c920e webcam
    Accessory #2 Sabrent DS-SC5B 5-Bay USB-C HDD docking station
    Accessory #3 xrite i1 Display monitor calibration
    geneo's Avatar
    Join Date
    Feb 2014
    Reputation
    107
    Posts
    665

    According to the MB spec, it comes with:

    1 x M.2 SSD screw package(s). It is not held down by the MB heatsink screw. You'll need a standoff between the motherboard and the screw if one already isn't screwed into the board. There are three holes to accommodate various length nvme drives. The standoff may be screwed into a hole that isn't appropriate for the length of your drive, so you would have to move it.

    The diagram of the motherboard illustrates standard m.2 slots and holes to screw the m.2 standoff in.

    The m.2 nvme drive you have looks to have standard mounting.

    If the nvme drive is one-sided, that is, no chips on the bottom side, you'll need to install the provided pad. between the drive and motherboard.

    What am I missing? What are you missing? Maybe a photo would help.
    Last edited by geneo; 06-02-2022 at 06:55 AM.

  5. #5
    ROG Member Array
    Join Date
    Oct 2021
    Reputation
    22
    Posts
    8

    I cannot post photo cause mainboard is mounted now.

    The problem is:
    The M.2_1 interface of the Maximus XIII Apex mainboard ist not designd to use an (2280) SSD without the ASUS motherboard heatsink.
    The SSD is hold down by the heatsink and his screws. For shorter SSD they are screws and holes but not for a full-lenght 2280.

    You cannot use standard nvme screws and screw holders.

  6. #6
    ROG Guru: Orange Belt Array Braegnok PC Specs
    Braegnok PC Specs
    MotherboardAsus Crosshair X670E Gene
    ProcessorAMD Ryzen 9 7950X
    Memory (part number)F5-6000J3038F16GX2-TZ5N
    Graphics Card #1AMD Radeon RX 6900XT
    MonitorBenQ EX270QM
    Storage #1SK Hynix Platinum P41
    CPU CoolerOptimus AM5 Foundation
    CaseAsus Prime AP201
    Power SupplySeaSonic SSR-1000TR
    Keyboard Das Keyboard 4 Ultimate
    Mouse G502 Lightspeed
    Headset SteelSeries Arctis Pro
    OS Windows 11 Pro
    Braegnok's Avatar
    Join Date
    Nov 2019
    Reputation
    40
    Posts
    412

    Hello martin-m,

    The quickest solution is to simply remove the factory heatsink & tray from your MP600 Pro XT drive.

    Install the bare drive into motherboard M.2 slot, and use the motherboard heatsink as it's intended.

    The factory heatsink snaps on tray with the drive sandwiched between, and is easy to remove by pushing in on locking tabs, pulling apart.

    MP600 Pro XT with heatsink & Tray installed.

    Click image for larger version. 

Name:	Heatsink & Tray.jpg 
Views:	1 
Size:	139.9 KB 
ID:	93349

    Push in on locking tabs, and the heatsink lifts off tray.

    Click image for larger version. 

Name:	Heatsink & Tray locking tabs.jpg 
Views:	1 
Size:	175.9 KB 
ID:	93350

    Bare drive after removing heatsink & tray.

    Click image for larger version. 

Name:	Bare drive.jpg 
Views:	1 
Size:	282.4 KB 
ID:	93351

  7. #7
    ROG Junior Member Array
    Join Date
    Feb 2013
    Reputation
    10
    Posts
    1

    Quote Originally Posted by Braegnok View Post
    Hello martin-m,

    The quickest solution is to simply remove the factory heatsink & tray from your MP600 Pro XT drive.

    Install the bare drive into motherboard M.2 slot, and use the motherboard heatsink as it's intended.

    The factory heatsink snaps on tray with the drive sandwiched between, and is easy to remove by pushing in on locking tabs, pulling apart.

    MP600 Pro XT with heatsink & Tray installed.

    Click image for larger version. 

Name:	Heatsink & Tray.jpg 
Views:	1 
Size:	139.9 KB 
ID:	93349

    Push in on locking tabs, and the heatsink lifts off tray.

    Click image for larger version. 

Name:	Heatsink & Tray locking tabs.jpg 
Views:	1 
Size:	175.9 KB 
ID:	93350

    Bare drive after removing heatsink & tray.

    Click image for larger version. 

Name:	Bare drive.jpg 
Views:	1 
Size:	282.4 KB 
ID:	93351
    did you use a tool to push all the tabs? I'm pushing and don't feel any movment?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •