Results 1 to 2 of 2
-
09-28-2021 10:44 PM #1New ROGer Array
- Join Date
- Dec 2019
- Reputation
- 10
- Posts
- 4
ROG Gladius II Wireless Sensitivity issue when connect with RF (USB 2.4GHz Dongle)
I have a ROG Gladius II Wireless, which I usually use with my USB cable connection.
Recently got an upgrade on my table setup hence would like to switch to the RF mode (USB 2.4GHz Dongle). But I found that when connect under RF mode, the sensitivity of the mouse becomes weird which the DPI is being set to 1600, but the movement of the mouse is not like what I have when connect with the cable, it perform like have higher DPI than 1600 but sometimes it works fine, hence lower the DPI doesn't work as when it works properly.
Tried to connect with Bluetooth and working fine.
Updated the latest firmware through Armoury Crate but didn't solve the issue.
Firmware version:
- Device version: 2.36.40
- Dongle (USB) version: 1.05.03
- Dongle (2.4GHz) version: 1.20.22
-
11-14-2021 09:27 PM #2Moderator Array Nate152 PC Specs
Nate152 PC Specs Motherboard ROG Maximus IX Code Processor i7-7700k 5.2GHz Delidded Memory (part number) 16GB G.Skill Trident Z - 3600MHz 16-16-16-36-2T Graphics Card #1 Titan Xp - EKFC waterblock Graphics Card #2 Titan Xp Sound Card ROG SupremeFX 2015 Monitor HP ZR30w Storage #1 Toshiba VX500 256GB CPU Cooler Swiftech Apogee GTZ Case Thermaltake Armor+ VH6000 Power Supply PCP&C Turbo Cool 1200w Keyboard ROG Falchion NX / Strix Flare II Mouse ROG Chakram X/Chakram Core/Spatha X Headset ROG Delta S Animate Mouse Pad Steelseries Prism XL + ROG Scabbard II OS Windows 11 Home Accessory #1 Asus optical drive Accessory #2 Koolance ERM-2K3U 
- Join Date
- Feb 2013
- Reputation
- 347
- Posts
- 17,088
Hi Yao95
Try going to Mouse Properties, on the Pointer Options tab, uncheck 'Enhance Pointer Precision' and click apply.
Last edited by Nate152; 11-14-2021 at 09:35 PM.
Reply With Quote
