Results 1 to 2 of 2
  1. #1
    ROG Member Array
    Join Date
    Dec 2015
    Reputation
    10
    Posts
    7

    New to Overclocking, 10900kf

    I've never overclocked before, and want to get a little more outta my system. I use this pc primarily for Iracing in VR, and would like a little more from it. I used Intel Performance Maximizer in the beginning, until I noticed in HWM, that my speeds under load were still showing 4.9 on all cores. When I initially ran the Intel Performace Maximizer, it gave me an All Core Pass @ 5.2ghz, but then docked 100mhz. Anyway, I uninstalled it, and never used it again. I eventually did a clean install of Windows 11, and decided to try and OC this thing again. Since IPM gave me an All Core Pass @5.2, I'm hoping that I can get a manual 5.1 outta this thing. I changed the following...

    Asus TUF Z490 Plus
    GeForce 3080 010G
    Enable MCE
    XMP set to XMP2
    Sync all cores 51
    Core Voltage set to 1.340
    Cache min/max 48
    AVX 0
    LLC4
    Speedstep/Speedshift Enabled
    Hyperthreading Disabled
    Balanced power plan

    I ran Realbench for two hours, got a pass @ 1.340v, temps maxed at 79C. I tried at 1.330v, but is showed a result of "unstable", so back to 1.340v.

  2. #2
    ROG Member Array
    Join Date
    Dec 2015
    Reputation
    10
    Posts
    7

    Tweaked my fan speeds, ran Realbench stress test for 4 hours 5.1ghz @ 1.34v, Realbench showed a max cpu temp of 77c, HWM recorded 75c. Got a pass.

    Click image for larger version. 

Name:	OC 1.jpg 
Views:	0 
Size:	489.5 KB 
ID:	91593

    Click image for larger version. 

Name:	OC 2.jpg 
Views:	0 
Size:	515.8 KB 
ID:	91594

    Click image for larger version. 

Name:	OC 3.jpg 
Views:	0 
Size:	474.3 KB 
ID:	91595

    Click image for larger version. 

Name:	OC 4.jpg 
Views:	0 
Size:	424.8 KB 
ID:	91596
    Miniatura de Adjuntos Miniatura de Adjuntos OC 1.jpg  

    OC 1.jpg  


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •