cancel
Showing results for 
Search instead for 
Did you mean: 

Z590-E with Dual Video (OnBoard + Radeon RX5700

mralisson
Level 7
Hey, guys. I just update my system from a Maximus IX to Strix Z590-E. All remaining parts (including Nvme with windows 10 installed) are the same.

Therefore, I'm unable to get the onbard video work. From Device Manager, the onboard video is absent. On BIOS, there is no setting for disabling the onboard video.

Im my previous setup, I was able to use onboard + RX5700 normally. Is there any trick on Z590 to use both onboard + RX5900 ?

Thanks
2,610 Views
18 REPLIES 18

Shark007
Level 10
BIOS / Advanced Mode / Advanced / System Agent

Unfortunately I dont' have such option when my graphics card is inserted ...

90279

My motherboard is a Prime Z590-A
I assumed your bios would be similar to mine - guess not.
90280

I just have these options with my graphics card detached from motherboard ... weird issue!

Most likely, you need to be connected to the graphics card on boot (not the iGPU)
for the options to be present.

Thanks, but this is exaclty my situation: I'm connected to the graphics, not iGPU. And the options are absent 😞 I opened a ticked on Asus ROG Support for that ...

STARRAIN_ROG
Customer Service Agent
Hi mralisson,
Do you connect two monitors, one for onboard and one for Radeon RX5700 graphics card?
Is there only auto option for primary display setting?
Have you restored bios to all default settings?
May I have the bios version and CPU model name?
Thank you.

STARRAIN@ROG wrote:
Hi mralisson,
Do you connect two monitors, one for onboard and one for Radeon RX5700 graphics card?
Is there only auto option for primary display setting?
Have you restored bios to all default settings?
May I have the bios version and CPU model name?
Thank you.


1. No. Two monitors connected through RX5700
2. No. PEG e PCI also
3. Yes. No luck
4. Bios 1007 (latest). CPU i7 11700K (yes, it supports onboard graphics)

Thanks for your patience.

STARRAIN_ROG
Customer Service Agent
Hi mralisson,
Is there also iGPU and PCIE in primary display setting?
Could you please one of your monitor to the onboard graphics and then check the bios settings and device manager again?
Thank you.